My jog
Moderator: Moderator
Re: My jog
as far as anything obtainable here in the states goes the horizontal Jog is quiet high on my wish list.
i like the look and the motor if rife with tuning parts availability.
so heres a question- answer as objective as you can.
take a stock Jog such as this one.add a pipe and jetting to suit-
take a stock af16 motored Honda(US spec) add the same to it-
question-
which will respond to the tuning better with what result?
i'd wager that the Jog is lighter out of the box and is faster out of the box(stock) compared to theSA50 for example.
i like the look and the motor if rife with tuning parts availability.
so heres a question- answer as objective as you can.
take a stock Jog such as this one.add a pipe and jetting to suit-
take a stock af16 motored Honda(US spec) add the same to it-
question-
which will respond to the tuning better with what result?
i'd wager that the Jog is lighter out of the box and is faster out of the box(stock) compared to theSA50 for example.
busting my knuckles on vices since
for long as i can remember
for long as i can remember
Re: My jog
as much as i love my honda bikes, the real truth is a 70cc jog will beat a 72cc dio.
the minarelli motor design is a way more efficient motor than a af/16. The down fall of it is you must use good parts, not taiwan stuff. If you do you really need to know the matching and porting. I have built 2 jog style motors here for my guys,one expensive parts, other taiwan parts. The difference is about like 5mph on the top end. 10.6 vs 11.6 in the 1/8 mile. As for a dio its alot easier and cheaper to go fast at the start, but to get tru speed, thats takes alot of tuning and porting as well. The set up i have right now in my dio is a 72cc polini, so far with my gears @ 8.5 it wont go faster than 73. I think the jog set up with good quality parts can reach 80....only time wil tell hehehe!
aloha
D
the minarelli motor design is a way more efficient motor than a af/16. The down fall of it is you must use good parts, not taiwan stuff. If you do you really need to know the matching and porting. I have built 2 jog style motors here for my guys,one expensive parts, other taiwan parts. The difference is about like 5mph on the top end. 10.6 vs 11.6 in the 1/8 mile. As for a dio its alot easier and cheaper to go fast at the start, but to get tru speed, thats takes alot of tuning and porting as well. The set up i have right now in my dio is a 72cc polini, so far with my gears @ 8.5 it wont go faster than 73. I think the jog set up with good quality parts can reach 80....only time wil tell hehehe!
aloha
D
Re: My jog
Like I tell people all the time
Speed cost money ..if you have to ask how much then most times your not going to do it ! Haha ...easy couple grand ..a nice honda 72 set u!p is easy a grand in just parts .then you need the labor and time to port and tune. Out of the box works fine ,but to get the real power its in the tuning and porting . Jog set ups are really diffrent thinking.you really need to know What parts work at what rpms..mismatch then yourgoing backwards
Speed cost money ..if you have to ask how much then most times your not going to do it ! Haha ...easy couple grand ..a nice honda 72 set u!p is easy a grand in just parts .then you need the labor and time to port and tune. Out of the box works fine ,but to get the real power its in the tuning and porting . Jog set ups are really diffrent thinking.you really need to know What parts work at what rpms..mismatch then yourgoing backwards
Re: My jog
thats interesting.
thank you for the insight. it is always refreshing when we are able to learn about the innerds of scooter tuning from others who have come before you and will share what they found down the roads journeyed toward scooter tuning nirvana.peace.
thank you for the insight. it is always refreshing when we are able to learn about the innerds of scooter tuning from others who have come before you and will share what they found down the roads journeyed toward scooter tuning nirvana.peace.
busting my knuckles on vices since
for long as i can remember
for long as i can remember
-
- Spree
- Posts: 161
- Joined: Mon Aug 24, 2009 10:18 am
- Location: Kadena ABS, Okinawa Prefecture, Japan
Re: My jog
Im working on a 92 Jog right now, I have a race ported Tai, 70cc kit. Leo Vince zx exhaust, and everything else I believe is stock. (clutch spring looks preformance though)tru72 wrote:as much as i love my honda bikes, the real truth is a 70cc jog will beat a 72cc dio.
the minarelli motor design is a way more efficient motor than a af/16. The down fall of it is you must use good parts, not taiwan stuff. If you do you really need to know the matching and porting. I have built 2 jog style motors here for my guys,one expensive parts, other taiwan parts. The difference is about like 5mph on the top end. 10.6 vs 11.6 in the 1/8 mile. As for a dio its alot easier and cheaper to go fast at the start, but to get tru speed, thats takes alot of tuning and porting as well. The set up i have right now in my dio is a 72cc polini, so far with my gears @ 8.5 it wont go faster than 73. I think the jog set up with good quality parts can reach 80....only time wil tell hehehe!
aloha
D
Do you have any recommended parts? Price vs Speed/Power?
Can you lists your setups or link me to build pics/topics?
Thanks
'98 Yamaha Jog Cy50k
'96 "Frankenstein" Japanese Jog Cy50
'96 "Frankenstein" Japanese Jog Cy50
Re: My jog
Speed/Power cost price need to spend at least $2,000 is buying good parts.
Re: My jog
tru72 wrote:Like I tell people all the time
Speed cost money ..if you have to ask how much then most times your not going to do it ! Haha
Hey nobody was talking about that Hawaiian ice. =P LOL that's going in my Signature 4 sure.
"Like I tell people all the time Speed cost money ..if you have to ask how much then most times your not going to do it !" -tru72
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
Re: My jog
Batu!
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
Re: My jog
LOL@dem0n!
working on getting a nice disc front end. once a few more questions are answered, then we shall see from there!
working on getting a nice disc front end. once a few more questions are answered, then we shall see from there!
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: My jog
Do the front and rear pieces of the headset get changed in this conversion?tru72 wrote:well here is some pics of one of my many on going projects..
jdm headset
If so, Do you still have the stock rear(purple) piece hanging around somewhere? Mine is trashed.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: My jog
traffic i do hehee but im keeping it as a spare in case i sell the bike. Been trying to locate a white nose, mines has a small crack in it. Been wanting to buy some kool stuff for this bike but i hate doing anything to it because of its all original look.. I have a whole stage 6 h20 R/T set up but im looking to put it in something else. maybe.. hehehe
only time will tell!
only time will tell!
Re: My jog
Nice Jog D!
Too many projects is an understatement!!
Too many projects is an understatement!!
Geoff
'85 Aero 50 w/Dio 66cc
'87 Elite 50 w/Dio 72cc
'87 Spree -SOLD!
Puch Magnum
Yamaha Razz POS -Soon to be Dio powered!
'85 Aero 50 w/Dio 66cc
'87 Elite 50 w/Dio 72cc
'87 Spree -SOLD!
Puch Magnum
Yamaha Razz POS -Soon to be Dio powered!
- sum-azn-kid
- Elite
- Posts: 333
- Joined: Mon May 24, 2010 2:04 am
- Location: Hawaii, Maui
Re: My jog
disk brakes from veedub
http://cgi.ebay.com/ebaymotors/Yamaha-J ... 2eb1b16471
http://cgi.ebay.com/ebaymotors/Yamaha-J ... 2eb1b16471
2007 SYM DD50- baby blue 72 "Daily rider"-sold
1988 Honda SB50P-on going project
zuma 125-sold
Ninja 250r-totaled
1988 Honda SB50P-on going project
zuma 125-sold
Ninja 250r-totaled