baby blue 72

[sum-azn-kid]

My friend droped this off at my house for 1,500




let the work begin.
He told me it has a 72 polini and had polini gears. i dont know if it is the corsa or contessa, yet. ill look into that later.
i have many parts waiting to go onto this bike.
heres what i know for sure is in it.
pg long(takin off)
keli pulley
30 oko carb(takin off)
ct chrome mani(takin off)
koso green fan
the goodies

[bakaracer]

lookin good cuz! those gears will be 7.8to1 for the sym trans.that will be good for the polini bore and that pg long.

[sum-azn-kid]

i forgot to upload the pipe im going to use.

she sound cherry. just need to modify the mounting holes
oh and i was told the bike had polini gears which i think are primaries so idk if i can even use the gears i bought.

[bakaracer]

thats the pipe right there!! just count the clutch bell turns to 1 rotation of the tire.that should tell you whats in there. that pipe like the higher rpms so tune for that. with the 72 kit, big carb ,gears and that pipe you should see 65mph no problem.

[sum-azn-kid]

baka the gears ar 7:1 and it sounds like str8 cuts when you turn it. so im guessing it is the polini's but i've seen taiwan ones too. it dont really matter to me. bore kit is THE corsa haha. maybe swap for 78cc alum later. and took off the PG long gotta mod the scorp. mount.
check out the virgin SYM intake ports. frickin tiny.


i think ill leave em for now since im too lazy to split the case and cut.
my goal it to beat my friends mini stroke corsa, wit PG long and 6:1 or something
and if anybody buys one new OKO carb becareful when you take the bowl off. stripped one screw the thing was so tight.
aloha

[bakaracer]

if you switch out your gears to the 7.8to1 or get s gears so you can have 8to1, your dig out should be able to keep up with his dig out ,the reason is that you will be better into the rpm range with the scorpion than he will be with the pg long. with the 8to1 gears 65mph+ is no problem plus your lowend going be real good to.

[elite_dub]

i forgot to upload the pipe im going to use.

she sound cherry. just need to modify the mounting holes
oh and i was told the bike had polini gears which i think are primaries so idk if i can even use the gears i bought.

Curious where did you get the pipe from?? looks like to be the quieter version because the belly is near the mount..NM I just saw the Scorepen sticker

[sum-azn-kid]

haha i guess i lost my edge than since my friend is goin oahu to buy on scorp. too

[sum-azn-kid]

ok so i got the pipe and 28 oko in with 135 main and 50 pilot(motor is unported so amll jets) but she no start. carb get fuel in bowl since i kicked it 10 times and watched the gas flow in(clear fuel line). i didn't touch the screws since idk what to turn and what way haha.

[veedubh20]

looking good!

[sum-azn-kid]

thanks too bad she not running right now. its my first dio build so hopefully i dont mess up this nice bike. it was running before i touched the carb. btw your bikes are cherry. JDM action

[bakaracer]

up the pilot to a 52 at lease. you might have to use a 55. the screw with the spring on it is the idle.the othere is the air fuel sccrew.set it to 1 1/2 to start.pull up the choke for cold starts. what plug are you using? set the plug gap to .025.

[sum-azn-kid]

ok i turned it out 1.5 and pulled the choke but still no start. plug is b8hs. has spark, but the plug is black/wet and the gap is almost as thick as the tip. could the carb be floaded? btw before i changed carb/pipe you would have to play with the gas to get it going. maybe too much gas?

[tru72]

pull up your pants! it sounds flooded LOL!
did you post this before you called me? HEHE

[sum-azn-kid]

haha after. thats the only thing i can think of since it ran after the pipe was change but once i touched the carb she no go. gotta be the carb. i put the air filter back on too.