Sprelite The Begining Of My Epic Build

SpreeMadness520 · Post by **SpreeMadness520** » Thu Aug 11, 2011 3:30 pm

Like 8 and no

Petrock's 1984 Spree · Sat Aug 13, 2011 11:58 am

When i did a comp test i just un-did the hose clamp connecting the carb to the intake( gotta pull the carb off it too) and then tried. That way you dont need to open the throttle and you can just kick it.

Works great

SpreeMadness520 · Post by **SpreeMadness520** » Wed Aug 17, 2011 7:23 pm

I have a problem, when I go to work or longer distance trips, I give it full throttle and coast as seen in my videos...after a while it bogs And slows down and sometimes dies t-jamz says its tranny problems.... Please help

Trafficjamz · Post by **Trafficjamz** » Wed Aug 17, 2011 11:41 pm

SpreeMadness520 wrote:I have a problem, when I go to work or longer distance trips, I give it full throttle and coast as seen in my videos...after a while it bogs And slows down and sometimes dies t-jamz says its tranny problems.... Please help

What are the temps at when it stalls?

bakaracer · Post by **bakaracer** » Thu Aug 18, 2011 1:10 am

SpreeMadness520 wrote:I have a problem, when I go to work or longer distance trips, I give it full throttle and coast as seen in my videos...after a while it bogs And slows down and sometimes dies t-jamz says its tranny problems.... Please help

the tranny doesnt cause the bike to die like that. thats more a jetting issue.

spree-rider · Post by **spree-rider** » Thu Aug 18, 2011 2:31 am

Jetting sounds lean

SpreeMadness520 · Post by **SpreeMadness520** » Mon Aug 29, 2011 6:33 pm

Alright its running good but it still bogs after riding for a while (300 degrees) and sometimes shuts off.. Im thinking the compression is too high because its overheating kinda fast...but the bogging is starting to * me off please help

spree-rider · Post by **spree-rider** » Mon Aug 29, 2011 6:46 pm

UP YOUR JETS

Trafficjamz · Post by **Trafficjamz** » Mon Aug 29, 2011 8:24 pm

spree-rider wrote:UP YOUR JETS

ALL CAPS RAGE !!!!

No UP YOUR JETS

SpreeMadness520 · Post by **SpreeMadness520** » Thu Sep 01, 2011 11:07 am

The jets were fine, It was just an airleak from the ripped rubber ct manifold boot

Honda Spree and Elite 50 Forums

Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build