Sprelite The Begining Of My Epic Build

SpreeMadness520 · Post by **SpreeMadness520** » Thu Apr 07, 2011 10:21 pm

Here are my plans,

50mm Taiwan bore with CHT gauge

Keli or Polini Performance Clutch (1500k)

Some Type Of Racing Variator

And 9 To 1 Gears.

Looking For A Throttle Cable For The Dio And Probably Brake Cable. Hit Me Up Thanks

Trafficjamz · Post by **Trafficjamz** » Thu Apr 07, 2011 11:29 pm

The spree you rode had 9.1:1 gears

My elite had 8.4:1 gears

9.1:1 gears on a 85cc spree/dio will be a wheelie machine

fastplastic · Post by **fastplastic** » Fri Apr 08, 2011 12:45 pm

mine with non worn out tranny parts is a wheelie machine..... look more towards 7.9 or 8.4s

SpreeMadness520 · Post by **SpreeMadness520** » Fri Apr 08, 2011 3:42 pm

fastplastic wrote:mine with non worn out tranny parts is a wheelie machine..... look more towards 7.9 or 8.4s

I really liked the elites gearing so i will try to get 8.4s or any other good suggestion

SpreeMadness520 · Post by **SpreeMadness520** » Fri Apr 08, 2011 6:44 pm

Is 99mm off the left side of the elite engine mount correct?

SpreeMadness520 · Post by **SpreeMadness520** » Fri Apr 08, 2011 6:45 pm

How much do I take off of the top part?

Trafficjamz · Post by **Trafficjamz** » Fri Apr 08, 2011 11:32 pm

We measured the stock Elite E Mount. Then marked it on the Elite S mount.

You can do the same with the spree mount.

SpreeMadness520 · Post by **SpreeMadness520** » Sat Apr 09, 2011 11:02 am

Ok I See That Doesnt Seem To Hard How Much Do I Take Off Of The Top Part With The Rubber Bumper?

SpreeMadness520 · Post by **SpreeMadness520** » Sat Apr 09, 2011 8:36 pm

Possibly The New Batspree.

http://i1224.photobucket.com/albums/ee3 ... ate001.jpg

SpreeMadness520 · Post by **SpreeMadness520** » Sat Apr 09, 2011 8:40 pm

Engine Off, Cutting The Elite Mount Monday

SpreeMadness520 · Post by **SpreeMadness520** » Sat Apr 09, 2011 8:41 pm

Still Need To Know How Much To Take Off Of The Stem W/Bumber

Trafficjamz · Post by **Trafficjamz** » Sun Apr 10, 2011 4:53 am

SpreeMadness520 wrote:Still Need To Know How Much To Take Off Of The Stem W/Bumber

Enuff so the rubber bumper is in the middle of the hole on the frame.

SpreeMadness520 · Post by **SpreeMadness520** » Sun Apr 10, 2011 10:17 am

Trafficjamz wrote:
SpreeMadness520 wrote:Still Need To Know How Much To Take Off Of The Stem W/Bumber
Enuff so the rubber bumper is in the middle of the hole on the frame.

Ok can I use a spree shock? I think the bolt I need is M10 140mm.

SpreeMadness520 · Post by **SpreeMadness520** » Sun Apr 10, 2011 1:39 pm

Wow that cut is going to be real close to the arm

SpreeMadness520 · Post by **SpreeMadness520** » Sun Apr 10, 2011 6:08 pm

Cut the metal piece off of the spree mount

Honda Spree and Elite 50 Forums

Sprelite The Begining Of My Epic Build

Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build

Re: Sprelite The Begining Of My Epic Build