Sprelite The Begining Of My Epic Build
Moderator: Moderator
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Sprelite The Begining Of My Epic Build
Here are my plans,
50mm Taiwan bore with CHT gauge
Keli or Polini Performance Clutch (1500k)
Some Type Of Racing Variator
And 9 To 1 Gears.
Looking For A Throttle Cable For The Dio And Probably Brake Cable. Hit Me Up Thanks
50mm Taiwan bore with CHT gauge
Keli or Polini Performance Clutch (1500k)
Some Type Of Racing Variator
And 9 To 1 Gears.
Looking For A Throttle Cable For The Dio And Probably Brake Cable. Hit Me Up Thanks
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Sprelite The Begining Of My Epic Build
The spree you rode had 9.1:1 gears
My elite had 8.4:1 gears
9.1:1 gears on a 85cc spree/dio will be a wheelie machine
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
Re: Sprelite The Begining Of My Epic Build
mine with non worn out tranny parts is a wheelie machine..... look more towards 7.9 or 8.4s
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: Sprelite The Begining Of My Epic Build
I really liked the elites gearing so i will try to get 8.4s or any other good suggestionfastplastic wrote:mine with non worn out tranny parts is a wheelie machine..... look more towards 7.9 or 8.4s
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: Sprelite The Begining Of My Epic Build
Is 99mm off the left side of the elite engine mount correct?
- Attachments
-
- Elite engine mount
- Enginemounts001.jpg (29.79 KiB) Viewed 9686 times
Last edited by SpreeMadness520 on Fri Apr 08, 2011 6:46 pm, edited 1 time in total.
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: Sprelite The Begining Of My Epic Build
How much do I take off of the top part?
- Attachments
-
- Elite Engine Mount
- Enginemounts002.jpg (79.82 KiB) Viewed 9685 times
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Sprelite The Begining Of My Epic Build
We measured the stock Elite E Mount. Then marked it on the Elite S mount.
You can do the same with the spree mount.
You can do the same with the spree mount.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: Sprelite The Begining Of My Epic Build
Ok I See That Doesnt Seem To Hard How Much Do I Take Off Of The Top Part With The Rubber Bumper?
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: Sprelite The Begining Of My Epic Build
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: Sprelite The Begining Of My Epic Build
Engine Off, Cutting The Elite Mount Monday
- Attachments
-
- Missing an engine.jpg (71.01 KiB) Viewed 9618 times
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: Sprelite The Begining Of My Epic Build
Still Need To Know How Much To Take Off Of The Stem W/Bumber
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Sprelite The Begining Of My Epic Build
Enuff so the rubber bumper is in the middle of the hole on the frame.SpreeMadness520 wrote:Still Need To Know How Much To Take Off Of The Stem W/Bumber
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: Sprelite The Begining Of My Epic Build
Ok can I use a spree shock? I think the bolt I need is M10 140mm.Trafficjamz wrote:Enuff so the rubber bumper is in the middle of the hole on the frame.SpreeMadness520 wrote:Still Need To Know How Much To Take Off Of The Stem W/Bumber
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: Sprelite The Begining Of My Epic Build
Wow that cut is going to be real close to the arm
- Attachments
-
- more pics 002.jpg (142.06 KiB) Viewed 9593 times
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: Sprelite The Begining Of My Epic Build
Cut the metal piece off of the spree mount
- Attachments
-
- more pics.jpg (136.43 KiB) Viewed 9579 times
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa