Sexy Rexy Minarelli drag scoot "Non Honda build" ;)
Posted: Fri Dec 02, 2011 2:22 am
Well been wanting to build a different bike for along time, Finally got the opportunity to do so.
This is what is called a SMC Rexy. The manufacture is Taiwan. The motor is the closet thing you can get to a real minarelli. Alot of "Jog style" look like a minarelli but this is the closet to the original.
Pulled off everything to start from scratch
Swapped off the heavy disc front for a way light set up, since our track has such a long stopping area the lower powered set up works fine.
Used kiesler stretch mount, wanted it longer but for now this will work.
Had to do some changing and welding to get the right angle and height but it work!
For My fuel set up im using a oko 28 carb and a Stage6 straight back manifold. I was afraid for the to steep carb angle but my friend Ottoman said his is steeper LOL!
I figured just in case it didnt work to my expectations i fabricated a adapter from a CT black intake to get a more straight angle .
Put on the plastics to check the front end height and other clearance issues that might be apparent..
Took the seat apart and mounted it straight to the side panels, and trimmed them down
Mounted it, braced up the front area as well
Solid shock strut
Started doing the glove box plastic area, door will not be used. Radiator will go into there
All clean and ported , Malossi bore on this sucka! 77cc
Hebo crank
PVL gnition set up
Stage6 rear facing intake with Vforce reeds
Motor mounted with a malossi full variator set up, rear over drive pulley and gears
Stage 6 r1200 pipe
Figured Since the carb was at such a extreme angle , had to get the gas tank as far above it..
fill er up!
Made some mounts for the radiator in place of the glove box
This was the first water pump set up i did
Eating lunch i looked at it again and decided that the pump wasnt designed to be in a upright position, so after all the work i pulled it all out and redid it hahah!
Set up all my cables and wires
Fast paint job, spray can masta! Ready to rock and roll!!
Just like to thank some people that made it come together..
with out friends from all over the world its pretty hard not be thankful. Who said christamas doesn't come early!
Ottoman - thanks for da stuff! with your help this project wouldnt have gotten started
Michael & Julien @ Maxi Scoot. Yes your new team rider from Hawaii wil be representing you here well!!
George @ Motosource
Tim @ scootercraft
Frank @ Quickfixx thanks for the sponsored stuff man!!
Aloha Signs - he does all my vinyl stuff
Dayton & Randy My go to Machinist!
N4S Motorwerx crew & friends - with the constant harassment for motivation to build this!
This is what is called a SMC Rexy. The manufacture is Taiwan. The motor is the closet thing you can get to a real minarelli. Alot of "Jog style" look like a minarelli but this is the closet to the original.
Pulled off everything to start from scratch
Swapped off the heavy disc front for a way light set up, since our track has such a long stopping area the lower powered set up works fine.
Used kiesler stretch mount, wanted it longer but for now this will work.
Had to do some changing and welding to get the right angle and height but it work!
For My fuel set up im using a oko 28 carb and a Stage6 straight back manifold. I was afraid for the to steep carb angle but my friend Ottoman said his is steeper LOL!
I figured just in case it didnt work to my expectations i fabricated a adapter from a CT black intake to get a more straight angle .
Put on the plastics to check the front end height and other clearance issues that might be apparent..
Took the seat apart and mounted it straight to the side panels, and trimmed them down
Mounted it, braced up the front area as well
Solid shock strut
Started doing the glove box plastic area, door will not be used. Radiator will go into there
All clean and ported , Malossi bore on this sucka! 77cc
Hebo crank
PVL gnition set up
Stage6 rear facing intake with Vforce reeds
Motor mounted with a malossi full variator set up, rear over drive pulley and gears
Stage 6 r1200 pipe
Figured Since the carb was at such a extreme angle , had to get the gas tank as far above it..
fill er up!
Made some mounts for the radiator in place of the glove box
This was the first water pump set up i did
Eating lunch i looked at it again and decided that the pump wasnt designed to be in a upright position, so after all the work i pulled it all out and redid it hahah!
Set up all my cables and wires
Fast paint job, spray can masta! Ready to rock and roll!!
Just like to thank some people that made it come together..
with out friends from all over the world its pretty hard not be thankful. Who said christamas doesn't come early!
Ottoman - thanks for da stuff! with your help this project wouldnt have gotten started
Michael & Julien @ Maxi Scoot. Yes your new team rider from Hawaii wil be representing you here well!!
George @ Motosource
Tim @ scootercraft
Frank @ Quickfixx thanks for the sponsored stuff man!!
Aloha Signs - he does all my vinyl stuff
Dayton & Randy My go to Machinist!
N4S Motorwerx crew & friends - with the constant harassment for motivation to build this!