So at long last I have obtained the base for my first REAL scooter build. I have done some decent moped builds and I have kitted/tuned plenty of scooters but this is my first frame-up scooter build.
Long story short I am going with a naked Honda Spree frame and the engine/wheels/brakes/fork off of a Kymco ZX50 Super Fever.
I am going to post some "before" pictures and document my progress here.
Konda Super Spree: Project DIO-REE 1
Moderator: Moderator
Re: Konda Super Spree: Project DIO-REE 1
So here are the two starting points.
Pretty ratty right?
Pretty much every piece of plastic is broken on her and the seat is wrecked but she starts right up and runs great and she is fast.
When you get them next to each other you really get to see how much of a size difference there really is.
That front end is going to make a world of difference in off roading and stopping and ride quality. Its going to add a lot of weight but I just refuse to trust those tiny Spree brakes to stop me at speeds above 50mph.
Thats as far as i am now. Tear down begins tonight. Pretty sure I am going to have my naked Spree frame and ZX forks powder coated but I am not sure just yet what color scheme I want to go with.
Pretty ratty right?
Pretty much every piece of plastic is broken on her and the seat is wrecked but she starts right up and runs great and she is fast.
When you get them next to each other you really get to see how much of a size difference there really is.
That front end is going to make a world of difference in off roading and stopping and ride quality. Its going to add a lot of weight but I just refuse to trust those tiny Spree brakes to stop me at speeds above 50mph.
Thats as far as i am now. Tear down begins tonight. Pretty sure I am going to have my naked Spree frame and ZX forks powder coated but I am not sure just yet what color scheme I want to go with.
Re: Konda Super Spree: Project DIO-REE 1
this will be fun to watch. thanks for the pics
taz 50mm bbk, 51g. rollers,1500 c spring
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
Re: Konda Super Spree: Project DIO-REE 1
Wait, did i just read "OFF ROADING" ?!
you better be reinforcing that frame while youre at it
you better be reinforcing that frame while youre at it
Re: Konda Super Spree: Project DIO-REE 1
Wow, your spree looks EXACTLY like mine when I brought it home... Same missing panels, same dirty white, same ripped seat...
Looks like you got quite a project ahead of you.
Looks like you got quite a project ahead of you.
SWAG
1984 Honda Spree
1985 Honda Gyro S
1977 Honda Camino
1960 Alpa Moor
2009 Piaggio MP3 400
2002 BMW 330xi
1984 Honda Spree
1985 Honda Gyro S
1977 Honda Camino
1960 Alpa Moor
2009 Piaggio MP3 400
2002 BMW 330xi
Re: Konda Super Spree: Project DIO-REE 1
"Wait, did i just read "OFF ROADING" ?!
you better be reinforcing that frame while youre at it"
Yeah there might have to be a frame brace/crossbar added in there.
I have been looking around to see if anyone has ever but an elite/ZX engine on a Honda Express NA50 frame. Haven't found any info. I have plenty of spare Express frames so i am going to take a look at the feasibility of such an endeavor.
Also who has the best cheapo (<150) out there?
you better be reinforcing that frame while youre at it"
Yeah there might have to be a frame brace/crossbar added in there.
I have been looking around to see if anyone has ever but an elite/ZX engine on a Honda Express NA50 frame. Haven't found any info. I have plenty of spare Express frames so i am going to take a look at the feasibility of such an endeavor.
Also who has the best cheapo (<150) out there?
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Konda Super Spree: Project DIO-REE 1
Tate wrote:
I have been looking around to see if anyone has ever but an elite/ZX engine on a Honda Express NA50 frame. Haven't found any info. I have plenty of spare Express frames so i am going to take a look at the feasibility of such an endeavor.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Konda Super Spree: Project DIO-REE 1
Wow that Express SR with the scooter engine is FIERCE looking and I bet it hauls the * as well.
Thing is though an Express SR can be stupid fast on its own with Hobbit kits and pipes but still thats awesome.
I have been making progress but I am waiting to get my frame powder coated before I can move forward.
Pretty much just stock piling parts and doing other projs in the mean time.
Thing is though an Express SR can be stupid fast on its own with Hobbit kits and pipes but still thats awesome.
I have been making progress but I am waiting to get my frame powder coated before I can move forward.
Pretty much just stock piling parts and doing other projs in the mean time.
Re: Konda Super Spree: Project DIO-REE 1
And I meant to say, "Who has the best cheapo KIT out there, as in under $150."