spree af05 e swap project cheapa$$

dabinonahonda · Post by **dabinonahonda** » Thu May 03, 2012 11:53 pm

so i have been posting in technical help figured i would start a build tread ..im starting with a 84?spree that i paid 40 for seemed to be in good shape all ther ect....exspet for the transmission case was broken lol. After searching here and cl i found a good afo5p that was turned to a e .It seems to be fresh almost new .well heres some pics ill get some more up in the morning should be riding it tomorrow if i can find the right size nut for the rear wheel and the bolts for the pipe

the new motor!

fastplastic · Post by **fastplastic** » Fri May 04, 2012 7:14 am

check you jets for the new filter.... and what size is that filter?

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 7:24 am

not sure it was on the motor

fastplastic · Post by **fastplastic** » Fri May 04, 2012 7:25 am

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 9:37 am

ok went out today and put the motor in agian and hooked it all up if some one can hook me up with a pic or good diagram in how the fuel lines are hooked up ...thxs again jerry

swimmingfree · Post by **swimmingfree** » Fri May 04, 2012 9:44 am

its the same as the spree was ..
swimmingfree

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 9:51 am

hmm maybe my oil pump is bad i hooked it up like that and it was not moving any oil hmmm maybe just run premix

swimmingfree · Post by **swimmingfree** » Fri May 04, 2012 9:55 am

it dont move munch oil so the first tank shooed be a pre mix at 32 to 1 that means 2 oz of oil per tank in the spree ...
swimmingfree

SuprasNsprees · Post by **SuprasNsprees** » Fri May 04, 2012 9:57 am

dabinonahonda wrote:hmm maybe my oil pump is bad i hooked it up like that and it was not moving any oil hmmm maybe just run premix

it pumps very little oil at idle. it wont shoot out like a garden hose

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 10:23 am

so this is how is hooked up same as my spree i think the oil pump isnt working still no oil

looks like premix is gona haft to happen\

swimmingfree · Post by **swimmingfree** » Fri May 04, 2012 10:24 am

is this what you need??
swimmingfree

By freeswimming at 2012-05-04

dabinonahonda · Post by **dabinonahonda** » Fri May 04, 2012 10:32 am

do i have the line on the oil pump right ? i have all the rest right for sure hmmm

swimmingfree · Post by **swimmingfree** » Fri May 04, 2012 10:32 am

yes its right..
what is the jet on the carb ??? you may be running lean because of the air filter you are using you need about a 90 jet ...
was it that way when you got it if so what color is the plug ??? it shoiod be the color of a candy bar....
swimmingfree

Fishman43 · Post by **Fishman43** » Fri May 04, 2012 10:34 am

It looks like you have it hooked up correctly. With no oil in the feed line you are probably correct that premix is the way to go for now. I am sure you could post in the for sale/wanted section and find a replacement oil pump on the cheap!

swimmingfree · Post by **swimmingfree** » Fri May 04, 2012 10:37 am

one thing i see you may need to look at is how far the swing arm move you may hit the tire on the fram of the spree ????
swimmingfree

By freeswimming at 2012-05-04

Honda Spree and Elite 50 Forums

spree af05 e swap project cheapa$$

spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$

Re: spree af05 e swap project cheapa$$