Spree Facelift

[Candypaint]

past two days did some look upgrades, retro fit h11 HID's, Tuck and rewire the harness, but for some reason I'm getting oil leak from the screw located below the air/fuel screw..any idea's? heres the finish product getting ready again for NOS forum fest at Pacific Raceway...all scooters welcome



stripe down to metal and and anodize the wheels and two tone

[Trafficjamz]

nice job.

is the paint on the muffler high temp?

if not....it won't look nice for very long.




PS could you try to resize some of those pics....they are not large enuff for me to see.

[bradthreee]

Check to make sure the o-ring is still behind that screw. Where in CA are you?

[OneBulletDan]

If you ride that Spree around without the foam and cover, you`re one guy I`d never mess with!

[paulpauly7]

dude swap in a dio

[Candypaint]

Check to make sure the o-ring is still behind that screw. Where in CA are you?

thanks i'll look into that, waiting on new tires and picking up a spree for A$100 im from tacoma wa

[Candypaint]

If you ride that Spree around without the foam and cover, you`re one guy I`d never mess with!

lol, its awesome to lean around corners at 30mph now but im remolding the seat so this will do for now

[OneBulletDan]

If you ride that Spree around without the foam and cover, you`re one guy I`d never mess with!

lol, its awesome to lean around corners at 30mph now but im remolding the seat so this will do for now

Makes my * hurt just thinking about it!

[OneBulletDan]

Aw, come on! Swearblocker 2000 censors the word f a n n y ? You could say that in third grade and get away with it!

[Fishman43]

Couple comments/questions:

How do you anodize steel wheels? I thought anodizing only worked on aluminum.

I like the matching paint thoughout the scooter!

Now it just needs a petcock cover... I happen to know a guy

[Candypaint]

Couple comments/questions:

How do you anodize steel wheels? I thought anodizing only worked on aluminum.

I like the matching paint thoughout the scooter!

Now it just needs a petcock cover... I happen to know a guy

drill gun and rust wheel down to metal and depends how you cross mark the steel, then use a heat gun to heat the wheel and use clear primer, while 1000 watt light and heat gun till u see its dry, 2x's, then get anodize spray paint and light coat over and over till u get the color you want...its made for heat btw and it matches my candypaint :0)
Yes i need that cover....i text a guy on from craigslist, this is what i get....lol

[motormike]

Now it just needs a petcock cover... I happen to know a guy

Candypaint:..Fishman is reproducing some first rate petcock covers. He is reachable here through the private mesage line and is a reliable, moderately priced source...

[Candypaint]

Now it just needs a petcock cover... I happen to know a guy

Candyman:..Fishman is reproducing some first rate petcock covers. He is reachable here through the private mesage line and is a reliable, moderately priced source... [/color]]

thanks

[Candypaint]

http://instagr.am/p/Lxt-k3vsiZ/

Waiting on piston rings, gaskets, and while I wait forever, it was a pain to decarbonize the piston and exhaust port. Did I mention on my gps I'm going 35 on flat grounds prior and any tips on putting back the piston rings without stretching or breaking it? Plus I would love to show off the thing where the spark plug goes into. Btw the paint is 500f proof , thanks for all your input and can't ride with my fellow Tacomptons lol

[abreen89]

The piston rings pull apart just far enough to slip them on just be sure the longer ends on the rings are toward the bottom of the piston when u put them on ore else u will have to take them off and flip them over.