Spree Highway Speed Pipe build

[noiseguy]

All:

Will use following to document how the Spree pipes get built.

First, need a chamber. This is what we'll be using:

pocket_bike_exhaust.gif (15.19 KiB) Viewed 5200 times

And you need a downpipe:



or

[Videonut]

sounds interesting... and fun

[two4one]

Looking forward to getting mine. BTW has anyone ever recorded one of your pipes with the motor running? I'm curious how they sound.

[noiseguy]

They sound like a dirt bike to me.

[elitedio]

I did about the same thing on a Yamaha Zuma 50

I ran it for while but thought that on the zuma with a stock cylinder it needed a lower rpm band and cut the center section out and welded in a piece of tubing. Ending up with this.


Back to your build Noiseguy!

[kingkamehameha]

I did about the same thing on a Yamaha Zuma 50

I ran it for while but thought that on the zuma with a stock cylinder it needed a lower rpm band and cut the center section out and welded in a piece of tubing. Ending up with this.


Back to your build Noiseguy!

If anyone knows how to build 2t pipes its you!

[paulpauly7]

its really not that hard to do if you have time a welder and some pipes to work with a bit of trial and error you get the hang of it as you go and learn what works and what doesnt