Honda Nifty 125cc
Moderator: Moderator
Honda Nifty 125cc
Hi all,
Well time for the new project. I bought this nifty fifty off breezy who had done most of the had work to convert the scooter to ZX Dio front end and AF18E engine.
http://www.hondaspree.net/phpBB3/viewto ... 16&t=21756
Current status is disassembled. I need to tidy up some welds and weld in the mounts for the tie rod between the frame and neck.
The general plan is metallic silver, orange dio alloy wheels, 120kmh speedo (done), auxiliary tank (more on that later) and most importantly 125cc Stroker AF18.
The 125cc will consist of the ebay kit, 28mm OKO carb, V8 exhaust and 8 to 1 gears.
All this has to be done and reliably tuned by no later than the end of July. I want to put 1000km (600miles) on it before riding it around the South Island of New Zealand for a total ride of 2200km in 5 days. Oh yeah did I mention that will still be winter here at that time!
Anyway here are some pics to get us started. Some are mine some are breezy's.
Well time for the new project. I bought this nifty fifty off breezy who had done most of the had work to convert the scooter to ZX Dio front end and AF18E engine.
http://www.hondaspree.net/phpBB3/viewto ... 16&t=21756
Current status is disassembled. I need to tidy up some welds and weld in the mounts for the tie rod between the frame and neck.
The general plan is metallic silver, orange dio alloy wheels, 120kmh speedo (done), auxiliary tank (more on that later) and most importantly 125cc Stroker AF18.
The 125cc will consist of the ebay kit, 28mm OKO carb, V8 exhaust and 8 to 1 gears.
All this has to be done and reliably tuned by no later than the end of July. I want to put 1000km (600miles) on it before riding it around the South Island of New Zealand for a total ride of 2200km in 5 days. Oh yeah did I mention that will still be winter here at that time!
Anyway here are some pics to get us started. Some are mine some are breezy's.
- Attachments
-
- Fifty Project (17).JPG (183.01 KiB) Viewed 15950 times
-
- Fifty Project (11).JPG (162.86 KiB) Viewed 15950 times
-
- Fifty Project (1).jpg (71.71 KiB) Viewed 15950 times
Honda AF28 Dio ZX - Malossi 72cc
Honda DJ1R project
Honda DJ1R project
Re: Honda Nifty 125cc
Some more,
- Attachments
-
- Fifty Project (10).JPG (192.56 KiB) Viewed 15949 times
-
- Fifty Project (16).JPG (166.02 KiB) Viewed 15949 times
Honda AF28 Dio ZX - Malossi 72cc
Honda DJ1R project
Honda DJ1R project
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Honda Nifty 125cc
its gonna be stroker nifty vs corsa nifty its gonna be fricken awesone tearing up Christchurch streets on these mad machines
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: Honda Nifty 125cc
Well slow progress.
The engine should be done at shop soon then I can it port etc. The frame has been stripped and rust proofed. Had a mate weld the brackets on for me and I have chopped up the fairings to suit. Still a little more fine tuning to go on them and they will be good to go.
Mean while I have parts are arriving from all over the world.
I want to do a stretch job on this little beast. I was thinking 4". has anybody stretched a spree with af18? Has anybody stretched a spree?
In the below picture you can see the fairings on and the tie rod dummy mounted. The aux gas tank is going to be an octagon. That is a test piece just to get an idea of how big and long I can make it. I will bend up 2 halves and have them welded together with a tube up the middle that the tie rod goes through etc. It should be very functional, look great and be different to your standard round tank.
That's all for now folks.
The engine should be done at shop soon then I can it port etc. The frame has been stripped and rust proofed. Had a mate weld the brackets on for me and I have chopped up the fairings to suit. Still a little more fine tuning to go on them and they will be good to go.
Mean while I have parts are arriving from all over the world.
I want to do a stretch job on this little beast. I was thinking 4". has anybody stretched a spree with af18? Has anybody stretched a spree?
In the below picture you can see the fairings on and the tie rod dummy mounted. The aux gas tank is going to be an octagon. That is a test piece just to get an idea of how big and long I can make it. I will bend up 2 halves and have them welded together with a tube up the middle that the tie rod goes through etc. It should be very functional, look great and be different to your standard round tank.
That's all for now folks.
- Attachments
-
- Nifty 125 (Small).JPG (82.54 KiB) Viewed 15805 times
Honda AF28 Dio ZX - Malossi 72cc
Honda DJ1R project
Honda DJ1R project
Re: Honda Nifty 125cc
I forgot to ask were can you buy new Honda Nifty 50 stickers? I want the complete set - 2 x fairing and 1 x front steering stem cover decal.
Honda AF28 Dio ZX - Malossi 72cc
Honda DJ1R project
Honda DJ1R project
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: Honda Nifty 125cc
Right on bro. That is going to be a sweet build. Keep posting until it is finished. That thing will flyyyyyyyy.
Taz
Taz
Re: Honda Nifty 125cc
A little bit more done. Cases are back and I have ported them. ready to through it together. From the pics you can see my engine mount stretch and mock up.
- Attachments
-
- scooter stretch (3).JPG (195.49 KiB) Viewed 15688 times
-
- scooter stretch (2).JPG (214.69 KiB) Viewed 15688 times
-
- scooter stretch (1).JPG (205.25 KiB) Viewed 15688 times
Honda AF28 Dio ZX - Malossi 72cc
Honda DJ1R project
Honda DJ1R project
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Honda Nifty 125cc
Nice work ayden looking good.Show us your porting pics it seems to be something round here that people keep to them selfs
Did you see my new top speed haha down moorhouse ave racing a guy in a honda civic wont be doing that again i just got caught up in the moment cause i was winning
Did you see my new top speed haha down moorhouse ave racing a guy in a honda civic wont be doing that again i just got caught up in the moment cause i was winning
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: Honda Nifty 125cc
Where did that front fender come from?
1986 Spree w/ '87 SE50 motor
1985 Aero 50 w/ Dio motor: On Hold
1985 Aero 50 w/ Dio motor: On Hold
Re: Honda Nifty 125cc
Some fresh pics. Frame and wheels painted. Other forks installed. Slowly getting there. Did I mention I got Dio alloys! They look great.
The fender was made by the previous owner by chopping and glassing the old one. Thanks to Paulpauly7's father we now have a nice mould to reproduce them....
The fender was made by the previous owner by chopping and glassing the old one. Thanks to Paulpauly7's father we now have a nice mould to reproduce them....
- Attachments
-
- Scooter (6).JPG (189.71 KiB) Viewed 15350 times
-
- Scooter (5).JPG (195.19 KiB) Viewed 15350 times
-
- Scooter (4).JPG (203.29 KiB) Viewed 15350 times
Honda AF28 Dio ZX - Malossi 72cc
Honda DJ1R project
Honda DJ1R project
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Honda Nifty 125cc
anyone keen on buying the front guards contact me or ayden
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
-
- Elite
- Posts: 411
- Joined: Fri Jul 22, 2011 2:04 pm
- Location: Maine
Re: Honda Nifty 125cc
If "front guard" is referring to a copy of that front fender I'd be REAL keen! As long as the price is right;)