So I bought this 1994 elite last summer. It was totally torn apart and in boxes. It was missing a few pieces like a variator, piston, cylinder, exhaust, and the forks. Being in college at the time, i really didnt have the time or money to go out and get all these parts so i put it aside till i got done with school. i graduated this spring and now have the time to work on it. so i have been buying the parts that i am missing and putting it back together until i have to stop because i realize i am missing a part that i need. i finally think i have everything i need except for an exhaust gasket which i ordered today. i tried making one with some gasket material but it didnt last very long. it would only last long enough for me to get a couple minute ride. here is some pics of everything i have done.
The ruckus variator
Pressing in the 9 to 1 gears
50mm BBK installed
I threw the seat on it so i could take it for a spin. i have all the plastics for it except for one of the lower side skirts. i am just waiting to get it running good before i put them on that way i dont have to take them off all the time. i should get the exhaust gasket by monday so i can finish breaking it in.
i am wanting to go for a black and green kinda look. so i painted the rack, and the front shock cover green. i am thinking about doing the logos in green along with painting the rims black with a green pinstripe around them.
the boxed 94 elite
Moderator: Moderator
-
- Goped
- Posts: 62
- Joined: Sat Mar 31, 2012 3:17 pm
- Location: kalamazoo, michigan
the boxed 94 elite
2012 yamaha zuma 50f (daily driver)
1994 honda elite s (project)
1993 honda elite 50
1994 honda elite s (project)
1993 honda elite 50
-
- Goped
- Posts: 62
- Joined: Sat Mar 31, 2012 3:17 pm
- Location: kalamazoo, michigan
Re: the boxed 94 elite
the 50mm bbk turn this into 71 cc's correct?
2012 yamaha zuma 50f (daily driver)
1994 honda elite s (project)
1993 honda elite 50
1994 honda elite s (project)
1993 honda elite 50
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: the boxed 94 elite
Greetings:
No, it's 81.2cc. 2.5x2.5x3.1416x4.14.
No, it's 81.2cc. 2.5x2.5x3.1416x4.14.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: the boxed 94 elite
be sure to heat cycle the motor 10 times befor riding
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
-
- Goped
- Posts: 62
- Joined: Sat Mar 31, 2012 3:17 pm
- Location: kalamazoo, michigan
Re: the boxed 94 elite
Ya I have already heat cycled it a few times but once I get the exhaust gasket I will finish heat cycling it
2012 yamaha zuma 50f (daily driver)
1994 honda elite s (project)
1993 honda elite 50
1994 honda elite s (project)
1993 honda elite 50
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: the boxed 94 elite
have you changed the final drive gears ?If not id suggest you do try the 8:44 to 1
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
-
- Goped
- Posts: 62
- Joined: Sat Mar 31, 2012 3:17 pm
- Location: kalamazoo, michigan
Re: the boxed 94 elite
ya they r the 9 to 1 that came in the bbk I got from taz
2012 yamaha zuma 50f (daily driver)
1994 honda elite s (project)
1993 honda elite 50
1994 honda elite s (project)
1993 honda elite 50