Page 1 of 3

2000 Japan Jog

Posted: Sun Sep 13, 2015 2:27 pm
by veedubh20
here is my jog 2000 , i had owned for 10 yrs. I had purchase brand 2000 Jog had 3 miles on Nov. 2005 and sat at dealer showroom 5 yrs. Im gald purchase and pick up jog.

Here is the my project jog, Im doing front disk yamaha jog with japan headset. The headset shell covers had been looking 2 yrs and found it.

Re: 2000 Japan Jog

Posted: Mon Sep 14, 2015 8:46 am
by birdman
Its a 90cc Jog?

Re: 2000 Japan Jog

Posted: Mon Sep 14, 2015 10:23 am
by 1man8scoots
No its not a 90. He only has 90 panels.

Re: 2000 Japan Jog

Posted: Mon Sep 14, 2015 1:05 pm
by veedubh20
the rear blk panel is jog 90. the motor is stock polini 50cc and polini crank/bearings/ oem crank seals and 12:1 vino gear..

Re: 2000 Japan Jog

Posted: Sun Sep 20, 2015 12:48 am
by veedubh20
the polini cp 21mm on the way and will mount on stock intake manifold. then i will add final drive is 8.4 gear and Japan daytona center spring 1k.

Re: 2000 Japan Jog

Posted: Sun Sep 20, 2015 2:55 am
by 1man8scoots
21mm cp with a polini 50cc bore? Have you tried this combo before? A cp 21 is good for a hyper race cylinder on a Yamaha minarelli really.

Re: 2000 Japan Jog

Posted: Sun Sep 20, 2015 7:43 pm
by veedubh20
no. i will run stock airbox with bore kit and top performance blk.

Re: 2000 Japan Jog

Posted: Wed Oct 14, 2015 2:28 pm
by veedubh20
Doing the front disk , had new rim and tire.

Re: 2000 Japan Jog

Posted: Sat Oct 17, 2015 11:56 pm
by veedubh20
Here is the polinI evolution carb and kit.

Re: 2000 Japan Jog

Posted: Mon Jan 25, 2016 3:34 am
by veedubh20
Here my current update. Brembo caliper, front disk swap w/ Japan headset straight from japan! Some tuning on trans.

Re: 2000 Japan Jog

Posted: Mon Jan 25, 2016 6:24 pm
by Wheelman-111
Greetings:

Looking good, VeeDubh! Thanks for sharing.

Re: 2000 Japan Jog

Posted: Fri Jan 29, 2016 2:05 am
by veedubh20
I got mail from fedex. Polini. 17.5mm n jets
This carb is better than dellorto. :surprise: l

Re: 2000 Japan Jog

Posted: Fri Jan 29, 2016 10:11 am
by MrJumps
Maybe its me, but I always seem to thing the polini carbs look crap cased on a picture. I know they are good carbs, but the oko ones look better on pictures. Maybe I am just crazy. Make me wanna buy a Jog now though. Read somewhere you can bbk them to almost 20hp. Thats bloody nuts, the nuts I like to be.

Re: 2000 Japan Jog

Posted: Fri Jan 29, 2016 11:25 am
by veedubh20
Cp 17.5mm run crispy and smooth throttle respond. Corsa bore wake up!

I'm using a 02 horizontal zuma intake boot.

Cp evolution is bigger inlet 28.5mm need to use polini intake manifold.

Re: 2000 Japan Jog

Posted: Fri Jan 29, 2016 4:19 pm
by benji
I think most of the oko reputation comes from the Chinese knock offs. Real okos are made in taiwan and have been used on dirt bikes and quads for years w no issues. They'll even setup the carb for you, send it to you, and you can send it back to re-use it. Last time I checked polini was selling dellorto carbs, nice but far from perfect, ask anybody w an old 44 ida set for a bug haha.