My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
Moderator: Moderator
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
Reposting.. Old post got Deleted..
1983 Honda Urban Express Frame, custom mount.
72cc Corsa built AF16 motor...
Slowly finishing up Fabrication/Mods.
Couple pics of progress so far..
1983 Honda Urban Express Frame, custom mount.
72cc Corsa built AF16 motor...
Slowly finishing up Fabrication/Mods.
Couple pics of progress so far..
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
That's gonna be a rocket! Good luck keeping the front down
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
^ for real haha..at least you have disk front! Does it come disk? Or you fabbed it up? If so what front end is that?
Honda super dio
Corsa
26mm
Sparrow
Corsa
26mm
Sparrow
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
I would love to ride this,,might spank a hooked up spree
Honda super dio
Corsa
26mm
Sparrow
Corsa
26mm
Sparrow
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
That's a ZX50 front end, but not the one I'm using . Almost finished with it. Still have to Fab Elite wheel to run Disc Brakes... The Front end I'm installing is off a TaoTao ATM 50...pics soon..Downsouthdio wrote:^ for real haha..at least you have disk front! Does it come disk? Or you fabbed it up? If so what front end is that?
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
The Express looking good.
I don't think it will spank A spree with the lighter frame.
I don't think it will spank A spree with the lighter frame.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
You dont? Well ive gave a "tru72"ported corsa /scorp/ct/26mm stock stroke spree a run for his money with my full plastic full size elite..stock ports but ministroke..the spree rider was 150lb my elite rider was around 160..this thing looks light..there are 70cc huge bws zumas that can spank a 72cc spree..all about the tune and part combinations..the express looks really small to me..i am blind tho lol
Honda super dio
Corsa
26mm
Sparrow
Corsa
26mm
Sparrow
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
Elite e frame is really light too..not sure if its lighter than a spree tho
Honda super dio
Corsa
26mm
Sparrow
Corsa
26mm
Sparrow
-
- CB900F
- Posts: 1485
- Joined: Wed Mar 18, 2015 11:49 am
- Location: usa
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
The express is the lightest of the group. It looks like it'll have a pretty good center of gravity also.
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
The New Tripple Disc Setup almost Finished...
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
Hi HP. That's very cool how you installed the Metro wheel with the disc brakes.
Can we get a better look on how you welded that together? Thanks.
The Zuma motors are one of the fastest motors out there. That's true.
I know I had one.
Can we get a better look on how you welded that together? Thanks.
The Zuma motors are one of the fastest motors out there. That's true.
I know I had one.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
Tire mounted View... Also shows little sheet metal side panels I'm making to go in front of engine..
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
...Like...
the way it changes the whole package by going down to 10's
the way it changes the whole package by going down to 10's
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
I will post some pics..basically I cut the Drum brake part out of the Elite wheel. Cut the center out of TaoTao Steel 10" Disc brake wheel. Cut it down to the Length & just Fit inside the Elite wheel . Lots of cutting & fitting to get it Right..ped wrote:Hi HP. That's very cool how you installed the Metro wheel with the disc brakes.
Can we get a better look on how you welded that together? Thanks.
The Zuma motors are one of the fastest motors out there. That's true.
I know I had one.
Assembled wheel & put on a Cheap Motorcycle wheel balancer to Tru it up then Tac welded it together.
Test fit it on the Scoot to make Sure it was centered in forks & check For Correct spacing on Disc Brake Rotor and Caliper..
Took me about 4.5 hours Start to finish .... I know the Welds won't win any Beauty contests but after I blast & coat the wheel it will look Great...
Last edited by Hppowdercoatings on Sat Sep 26, 2015 9:59 pm, edited 1 time in total.
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
Re: My New Build... 1983 Honda Urban Elite72cc Corsa AF16...
Very nice work. thank for sharing.Hppowdercoatings wrote:I will post some pics..basically I cut the Drum brake part out of the Elite wheel. Cut the center out of TaoTao Steel 10" Disc brake wheel. Cut it down to the Length & just Fit inside the Elite wheel . Lots of cutting & fitting to get it Right..ped wrote:Hi HP. That's very cool how you installed the Metro wheel with the disc brakes.
Can we get a better look on how you welded that together? Thanks.
The Zuma motors are one of the fastest motors out there. That's true.
I know I had one.
Assembled wheel & put on a Cheap Motorcycle wheel balancer to Tru it up then Tac welded it together.
Test fit it on the Scoot to make Sure it was centered in forks & check For Correct spacing on Disc Brake Rotor and Caliper..
Took me about 4.5 hours Start to finish ....
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ