Teach an old dog new tricks.
Moderator: Moderator
Teach an old dog new tricks.
....
Last edited by pitobread on Sat Apr 01, 2023 3:25 pm, edited 1 time in total.
Re: Teach an old dog new tricks.
.....
Last edited by pitobread on Sat Apr 01, 2023 3:26 pm, edited 1 time in total.
- sum_azn_kid
- Goped
- Posts: 90
- Joined: Sun Sep 24, 2017 7:14 pm
- Location: hawaii
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Looks awesome. Why did u want to go with the small spline crank?
Super Dio ZX "Ube"
72 corsa
72 corsa
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
I didn't, I just had the cases.
I am putting a large crank in there. JiangWayne sells the seals to convert it.
I am putting a large crank in there. JiangWayne sells the seals to convert it.
- sum_azn_kid
- Goped
- Posts: 90
- Joined: Sun Sep 24, 2017 7:14 pm
- Location: hawaii
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
I'm curious to see how those seals hold up. I have a spare small spline af18e that idk what to do with.
Super Dio ZX "Ube"
72 corsa
72 corsa
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Well I guess its more complicated than just seals.
I will need to machine the bearing pockets deeper to use a late model crankshaft. It is not as easy as just seals. KN also makes 11mm wide bearings for this reason but I wanna use C4 bearings and they just look like taiwan bearings.
All in all its probably easier to just to buy another set of later model cases.
I will need to machine the bearing pockets deeper to use a late model crankshaft. It is not as easy as just seals. KN also makes 11mm wide bearings for this reason but I wanna use C4 bearings and they just look like taiwan bearings.
All in all its probably easier to just to buy another set of later model cases.
Last edited by pitobread on Sat Dec 30, 2017 7:08 am, edited 1 time in total.
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
And in case anyone is wondering, a early small crank web to web thickness is 34mm +/- .1
A late large crank is 36mm
A late large crank is 36mm
- sum_azn_kid
- Goped
- Posts: 90
- Joined: Sun Sep 24, 2017 7:14 pm
- Location: hawaii
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Wow that much work. Thanks for the heads up. I was gonna just use an af16e case on the trans side, if I build that motor. But In have a big spline af18e to play with.
Super Dio ZX "Ube"
72 corsa
72 corsa
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Well their are either the KN 11mm bearings and jiangwayne seals or bore 1mm each side.
I am going to attempt boring but also have another set of cases on the way as well.
I am going to attempt boring but also have another set of cases on the way as well.
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Hi pito. If you machine the bearing Pockets deeper, the bearings make cover the oil fill hole? Or not enough oil flow too bearing?
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
That may be a possibility, but those holes could be hogged out as well.
Ive got a large cases on the way here so if it doesn't work, Meh.
Ive got a large cases on the way here so if it doesn't work, Meh.
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
.....
Last edited by pitobread on Sat Apr 01, 2023 3:26 pm, edited 1 time in total.
Teach an old dog new tricks AF18E Stage6 R/T95 Build
Youve got some skills man.
How do you use the palette without the paint drying in 5 seconds?
How do you use the palette without the paint drying in 5 seconds?