86 Honda spree- Minarelli Corsa- updated page 1

[hothatch85]

After I get the new clutch and bell on I'll determine if I need the overdrive kit or not.

[LMH]

You always need the overdrive kit! Just be sure it'll fit under your kicker cover.
There's an overdrive for the dio Zx as well, I had one on a bike I sold a while back.

[jareeb]

could i get some more pictures of the way you mounted the engine?

[hothatch85]

i could get more pictures later tonight of the mount set up.

got the bike running better, can keep it in the power band and it screams untill about 55 then it runs outta gearing. so thats next on the list along with lighter roller weights. i ordered up some 4.5-6 so i should be set there. a few more things and she'll be running like a top!

[swimmingfree]

hothatch85 i like the looks of your scooter did a good job...
swimmingfree

[jareeb]

looks really good. i got my 40qmb in. just gota bring it to the brothers to finish the welding.

[hothatch85]

thanks swimmingfree!! its by no means a show stopper but i didnt build it for that. all about speed on this baby.

Jareeb- do you have a build thread or any pics? id like to see how someone else might do it. what are the plans for the motor?

[jareeb]

yes over on 49ccscoot. not a big fan of this forum. lol right now just a stage6 streetrace 70cc and ebay pipe. but this winter its getting a full build.

http://49ccscoot.proboards.com/thread/1 ... 0qmb-build

[hothatch85]

thanks for the gears Brandon! i look forward to slapping those puppies in this weekend!!

[808EERPS48]

hope she runs like a beast... looks cool but not a daily

[hothatch85]

got the 5g weights put in and wow what a difference! rips all the way to 50!! having a little spitter sputter throughout the powerband i noticed on the ride to work today. gonna pull the plug on lunch and investigate. possibly replace. anywho heres a pic of the hog before we enbarked on a glorious ride


i desperately need to start my floorboard, yes thats a flashlight as a headlight.

[hothatch85]

I took the spree up to the 1/8 mile drags last night. The bike was very consistent at around 13.42 at 50.89mph, with stock gears. They are having another bike class on Sunday hopefully my gears get here today I think if I paired them with 4.5g weights I could get more acceleration

[hothatch85]

No gears and I have no longer have a spark -.-

[LMH]

What went out? It's hard to kill the cdi but the stator can go bad easy if the reg is bad.

[hothatch85]

I don't know what went out! It's been on my mind all night. When I was trying to get it to fire I thought that it was just flooded with a fouled plug cause it would fire for just a second,so I pulled the plug and found out I wasn't getting spark. Well how could I not have spark when it fired very briefly? Anyway I pulled off the fan cover and say my pickup sensor wasn't secure anymore the bracket holding it broke so I'm thinking for sure that's what did it so I swapped stators with a oem zuma one I had and still nothing! It's possible this yamaha stator was already bad but no way to know. I ordered a new 40qmb stator and 86 spree cdi...I don't know what it could be. I have an idea that maybe when the pickup broke it sent a signal to the cdi and fried it maybe? But I also tried wiring up a generic cdi I had and I still couldn't get a spark. Very confused