Spreedio Performance ... AF16 BUILD
Moderator: Moderator
Re: Spreedio Performance ... AF16 BUILD
Its USPS fault
Re: Spreedio Performance ... AF16 BUILD
So i got my parts in ! Still needing a couple things to complete the build.
Reason why i chose the PG short because i didnt wanna cut ANY plastics on my scooter.
Stage 6 Clutch is next.
Reason why i chose the PG short because i didnt wanna cut ANY plastics on my scooter.
Stage 6 Clutch is next.
- Attachments
-
- Message_1489083295473(1).jpg (64.34 KiB) Viewed 12049 times
Re: Spreedio Performance ... AF16 BUILD
Finally got the motor built and in the spree. Rear tire rubs even with the shock tab from SSS.
- Attachments
-
- 20170322_143359.jpg (84.5 KiB) Viewed 12020 times
-
- 20170322_140736.jpg (85.21 KiB) Viewed 12020 times
-
- 20170322_131218.jpg (130.85 KiB) Viewed 12020 times
Re: Spreedio Performance ... AF16 BUILD
.
- Attachments
-
- Message_1490302545875.jpg (105.73 KiB) Viewed 12020 times
Re: Spreedio Performance ... AF16 BUILD
You can space your wheel out a hair by using a shim kit, or finding a hardware store that sells metric washers. Don't put to many shims tho, or more than one washer. You don't want to lose threads on the wheel nut.
Re: Spreedio Performance ... AF16 BUILD
Shimming the wheel out wont stop it from rubbing the rear fender.
I need to find some new haters...the ones I have are starting to like me.
-
- Goped
- Posts: 78
- Joined: Wed Feb 01, 2017 8:42 pm
- Location: TEXAS
Re: Spreedio Performance ... AF16 BUILD
Set up looks sweet. Very Jelly.
Re: Spreedio Performance ... AF16 BUILD
got it running today ! Its guzzles gas but halls *. pics coming soon
MJ is 114. runs very well. a tad rich but thats ok.
iam using 28:1 for break in like a gallon then gonna switch to 32:1.
Iam noticing that oil is coming out of the exhaust O ring. I tightened it up and oil still wants to come out.
MJ is 114. runs very well. a tad rich but thats ok.
iam using 28:1 for break in like a gallon then gonna switch to 32:1.
Iam noticing that oil is coming out of the exhaust O ring. I tightened it up and oil still wants to come out.
-
- Elite
- Posts: 392
- Joined: Mon Feb 01, 2016 11:04 pm
- Location: beaverton, or
Re: Spreedio Performance ... AF16 BUILD
Sounds like typical PG quality...
2000 Honda SR (purple swurp)
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: Spreedio Performance ... AF16 BUILD
are you using the exhaust gasket that came with the corsa? if so Id suggest getting one of those fancy copper gaskets from G9. I wont use that oring gasket anymore. and for the price theres no reason you should. I could never get the oring to sit right and from experience the lower stud can snap the exhaust flange. check out my thread to see the damage. cant say it was due to the oring gasket but I wont take that chance again especially when the copper one brandon sells works so much better to get a better seal and it sits better.
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
Re: Spreedio Performance ... AF16 BUILD
order 3 or 5 of these https://www.scooterswapshop.com/product ... ust-gasket
get a basterd out and get ready to file the pg down a bit mine never fit right ask 1man about that.
no more driving it, start it up to test if you see oil kill it, repeat until it no longer has oil blowing out and I mean the slights bit on a tissue is too much and when your ripping 7ks plus its[the gasket] gonna blow out.[f*** yer motor]
get a basterd out and get ready to file the pg down a bit mine never fit right ask 1man about that.
no more driving it, start it up to test if you see oil kill it, repeat until it no longer has oil blowing out and I mean the slights bit on a tissue is too much and when your ripping 7ks plus its[the gasket] gonna blow out.[f*** yer motor]
1993 ch80, swapped with a ch250
2021 DRZ400sm
2021 DRZ400sm
Re: Spreedio Performance ... AF16 BUILD
The oil that's coming front the exhaust o ring.is normal cause I'm using 28:1 right now. Soon I'm going to 32:1. I'll order some gaskets. I have the contessa not the Corsa.
Thank you for your input .
Thank you for your input .
Re: Spreedio Performance ... AF16 BUILD
running 32:1 now and no more oil.down jet to 112 temps are perfect. I really like these parts
Now for the next step. Can you further port a corsa kit? Contessa is great but im loooking for more acceleration. feels loosy goosy. haha
Now for the next step. Can you further port a corsa kit? Contessa is great but im loooking for more acceleration. feels loosy goosy. haha
- R1Titan911
- Elite
- Posts: 356
- Joined: Wed Aug 17, 2016 4:11 pm
- Location: FloGrown
Re: Spreedio Performance ... AF16 BUILD
I got your Corsa & Arrow !
87' Spree: "Victoria's Spreecret"
78' Express:
78' Express:
Re: Spreedio Performance ... AF16 BUILD
Have you done any trans tuning? Clutch? Rollers? Springs?jakubman1 wrote: loooking for more acceleration.
I need to find some new haters...the ones I have are starting to like me.