2000 Mystic Purple Elite build 74.6 MPH 80 + MPH

[ped]

[curtis966]

So boss! How's she perform?

[cruzingratiot]

took off the phongeer and put the windjammer on it felt lazy (not enough rpm)
put 6.5 rollers in (*took out 6.9)( may need lighter rollers)
didn't change anything else

went for a ride
hit 360 temp 10,500 rpm
carb needs some jetting
and the needle may need to be dropped a little fat 1/4-3/4
pulls really good
40 mph 7500rpm
the clutch needs to slip at a little higher rpm off the line

gps.jpg (155.96 KiB) Viewed 10940 times

[deuce217]

How much did you invest into that WJ pipe?

[ped]

for sure it musta been a kidney. Lol

[cruzingratiot]

How much did you invest into that WJ pipe?

sold a bunch of motorcycle parts I had laying around for the last ten years
just look at webike WINDJAMMERS MODEL : w-1274-129

just a observation
CT intake measures 1.040 inch
24mm carb =.9448 inch -.0952
26mm carb =1.023 inch -.017
28mm carb =1.102 inch +.062

looks like the 26mm carb better matches the ct intake size


Will a different reed block fit the ct intake ?
more later
need to find another intake I have laying around

HPIM0023.JPG (144.23 KiB) Viewed 9828 times

[curtis966]

On treatland the ct is called a 26mm oko intake so it prolly is best suited for it but idk. And the vforce reed block for a kx65 fits the ct. I've never used it but I hear it really helps a lot. About a $130 price tag with reeds.

[LMH]

If you haven't ported your cylinder that pipe won't be good for it. Pipe must match the cylinder. You need high flow. I'm getting the same pipe for my ported fabrizi because it matches the characteristics. The corsa is capable of flowing it but you absolutely must port it and the block. The laziness is due to too large of a chamber for the small displacement I'm guessing. Putting a bigger carb will hurt the bottom end even more and still flow the same up top thanks to the port timings. A 24mm carb can flow 13.5k on a corsa with a yasuni c16 modeled pipe.

[LMH]

I should also add that pipe looks freaking bad a#%!!

[cruzingratiot]

turned 11,000 + rpm with the old pipe
and the chamber and head pipe was bigger
changed the rollers lighter picked it up
need to order a better selection of rollers and rain to stop
as soon as some parts come in
ill spend more time trying to tune it in

video clip of exhaust
https://www.youtube.com/watch?v=3NsIBCVUTO8

wjcompairson.jpg (245.33 KiB) Viewed 9801 times

[cruzingratiot]

On treatland the ct is called a 26mm oko intake so it prolly is best suited for it but idk. And the vforce reed block for a kx65 fits the ct. I've never used it but I hear it really helps a lot. About a $130 price tag with reeds.

I saw that the kx65 vforce reed block fits
but I would like to see a picture of one fitted to the ct intake

Paul

[curtis966]

On treatland the ct is called a 26mm oko intake so it prolly is best suited for it but idk. And the vforce reed block for a kx65 fits the ct. I've never used it but I hear it really helps a lot. About a $130 price tag with reeds.

I saw that the kx65 vforce reed block fits
but I would like to see a picture of one fitted to the ct intake

Paul

Lovemyhonda you've prolly have one right? I don't haven't gone there yet lol.

[LMH]

I do, ill be home next week and take a picture. The kx65 is a dead ringer.
That arrow chamber is way bigger wow. The wind jammer my neighbor has is different than the one you have. He bought his many moons ago.

[Red Eft Performance]

Here is the intake you want.

viewtopic.php?f=2&t=29729

Keith

[deuce217]

How much did you invest into that WJ pipe?

sold a bunch of motorcycle parts I had laying around for the last ten years
just look at webike WINDJAMMERS MODEL : w-1274-129

Thats what I looked at and then asked. I love your motivation towards perfecting the elite. That thing is a piece of art.
need to find another intake I have laying around

HPIM0023.JPG