Page 1 of 1
SPREE / AERO HOW TO BUILD A ROLLING WORK STAND
Posted: Mon Oct 06, 2014 12:17 am
by 66SIX
I made a work stand for my Spree and it has helped me out .
So I thought I would see if it could help anyone else ?
Please note : This is best used with the floor board OFF but will also work with floor board on just be careful you don't bend or damage the floor board .
Re: SPREE / AERO HOW TO BUILD A ROLLING WORK STAND
Posted: Mon Oct 06, 2014 12:21 am
by 66SIX
Start here
Re: SPREE / AERO HOW TO BUILD A ROLLING WORK STAND
Posted: Mon Oct 06, 2014 12:28 am
by 66SIX
Next step I guess I should have mentioned you will also need 2 more 2X4 's for the side braces .
Re: SPREE / AERO HOW TO BUILD A ROLLING WORK STAND
Posted: Mon Oct 06, 2014 12:32 am
by 66SIX
Almost done
Re: SPREE / AERO HOW TO BUILD A ROLLING WORK STAND
Posted: Mon Oct 06, 2014 12:36 am
by 66SIX
Hope this works for you .
Makes working on Spree,s / Aero,s Easy .
Re: SPREE / AERO HOW TO BUILD A ROLLING WORK STAND
Posted: Mon Oct 06, 2014 1:16 am
by ped
Hi Mr.six. That looks very handy.
Re: SPREE / AERO HOW TO BUILD A ROLLING WORK STAND
Posted: Mon Oct 06, 2014 2:33 am
by 66SIX
ped wrote:Hi Mr.six. That looks very handy.
Thanks PED Life is easy w/ my Spree stand .
Re: SPREE / AERO HOW TO BUILD A ROLLING WORK STAND
Posted: Mon Oct 06, 2014 4:20 pm
by patthesoundguy
That stand is super duper! I may have to build one
thank you for sharing it with us.
Re: SPREE / AERO HOW TO BUILD A ROLLING WORK STAND
Posted: Mon Oct 06, 2014 4:40 pm
by Pineapplegti
I'll just steal Dave's
Re: SPREE / AERO HOW TO BUILD A ROLLING WORK STAND
Posted: Mon Oct 06, 2014 10:26 pm
by 66SIX
patthesoundguy wrote:That stand is super duper! I may have to build one
thank you for sharing it with us.
Thanks the most expensive part is the Harbor Freight Dolly the rest is scrap wood .
Re: SPREE / AERO HOW TO BUILD A ROLLING WORK STAND
Posted: Mon Oct 06, 2014 10:37 pm
by 66SIX
Pineapplegti wrote:I'll just steal Dave's
Good Luck I have it secured to my rack with Harbor Freights most expensive $9.00 Lock & Cable
You would have to be a master thief to get it I am also installing a motion camera system and thinking of an armed guard 24 / 7
That Spree work stand isn't going anywhere ....
Re: SPREE / AERO HOW TO BUILD A ROLLING WORK STAND
Posted: Fri Oct 10, 2014 1:51 am
by mousewheels
Nice stand 66Six....
-- "You would have to be a master thief to get it I am also installing a motion camera system and thinking of an armed guard 24 / 7"
Pay extra for 3 armed guards, if the extra arm is the long arm of the law.
Re: SPREE / AERO HOW TO BUILD A ROLLING WORK STAND
Posted: Fri Oct 10, 2014 3:20 pm
by 808EERPS48
some ingenuity right der