Ruckus Build- Stage6 RT Minarelli Powered (PIC HEAVY)
Posted: Fri Dec 19, 2014 11:34 am
im starting a build for my Ruck, This isnt a cookie cutter bike. im currently working on my 2nd rebuild for this bike. onto the good stuff,
picked up my stock ruck back in the fall of 2012 for $1500. aint she cute?!
thats like the only stock picture i have, first mods were Polini belt and vari to get my * going, straight bars, new grips, stoner eyes, removed floorboards, shaved headlight bracket and single mirror mod lol
then i dabbled with powdercoating
chopped and welded my stock seat frame because free, added uni filter and pegs, looks like i was starting my tank polishing too
Traded a video game for a paint job, 2011 wrx blue with deep violet added and gayflake, i think its more purple then blue
This was one of my favorite looks, pre stretch and lowering. At this point i have MNNTHBX exhaust, lazy eye, taillight and rising sun cvt cover. i also scored a complete trail tech for $50
I bit the bullet and ordered the mojo GET 12x8 kit, powdercoated my front wheel and threw on white walls for the feels. OH and my Galaxy seat cover.
swooped some polished RRGS lowdowns and the MNNTHBX drum adapter. The stance was about there..
Swooped a lowdown rear shock from Corsport in Denver powdered my rear wheel and hub...
I think the fastest i got on my get was probably 58mph, she went pretty good but i retired her to the shelf and went GY6 the winter of 2013...
Lots of Changes: GY6 150 longcase, mojo customs bolt on 12x8 stretch, i paired my old MNNTHBX muffler with a BTX header, Powderedcoated wheels anodized red, Honda red seat, FLP setbacks, Flp frame splitter, Carbon handlebars, Carbon rear fender, carbon air scoopy, DIY drag bar, Pizza pan wheel covers, and saggy * headlight frame.
Ditched my saggy * for a nice LED headlight, This picture was taken mid air ride install, i was having the hardest of time getting the carb to clear everthing aired up and down. i got it doe
Carbon Front fender was added, Zoomania carbon half face and zoomania carbon key cover. My battery box got nicked in the front and cracked and the cover was the best solution.
Okay, so that was summer 2014, i was over my gy6 at this point after building and riding my mina spree. i knew i needed a 2T power plant. sourced a zuma motor and harness off total ruckus for $200 First "mod" was a KN fatty hub. fit like a glove so i packed it up and sent it to Evan at FLP to get the original bolt pattern shaved off and 4x90 drilled in
Evan and i worked up a beautiful wheel set for the 2T build, 12x4 front and 12x6 rear 2pc wheels.
With the hub bolted, this was pre polishing..
Alittle Black Diamond goes a long way
i was able to make the Mojo Customs Bolt on SKINNY mount work with the 12x6 with minimal cutting
i picked up this blue rear frame to hold my old gy6 motor, I was just using it for mock up on the zuma motor. Ill be building that bike up as well this winter/spring as a second bike for myself and a ride for my girlfriend. The White wall is temp
got the zuma motor mounted to my bike. i was able to use my GY6 eye to eye bracket on the new set up with some trimming.
Got my ATR front hub polished up, installed composimo lowering springs up front and i had my rolling chassis.
it wont sit so racked once i get the exhaust on.
OKAY all caught up. as now recently my Stage6 RT cylinder kit, crankshaft and exhaust have all arrived at the ScooterSwapShop compound so if Brandon would like to add some nice HD shots of the parts he can
picked up my stock ruck back in the fall of 2012 for $1500. aint she cute?!
thats like the only stock picture i have, first mods were Polini belt and vari to get my * going, straight bars, new grips, stoner eyes, removed floorboards, shaved headlight bracket and single mirror mod lol
then i dabbled with powdercoating
chopped and welded my stock seat frame because free, added uni filter and pegs, looks like i was starting my tank polishing too
Traded a video game for a paint job, 2011 wrx blue with deep violet added and gayflake, i think its more purple then blue
This was one of my favorite looks, pre stretch and lowering. At this point i have MNNTHBX exhaust, lazy eye, taillight and rising sun cvt cover. i also scored a complete trail tech for $50
I bit the bullet and ordered the mojo GET 12x8 kit, powdercoated my front wheel and threw on white walls for the feels. OH and my Galaxy seat cover.
swooped some polished RRGS lowdowns and the MNNTHBX drum adapter. The stance was about there..
Swooped a lowdown rear shock from Corsport in Denver powdered my rear wheel and hub...
I think the fastest i got on my get was probably 58mph, she went pretty good but i retired her to the shelf and went GY6 the winter of 2013...
Lots of Changes: GY6 150 longcase, mojo customs bolt on 12x8 stretch, i paired my old MNNTHBX muffler with a BTX header, Powderedcoated wheels anodized red, Honda red seat, FLP setbacks, Flp frame splitter, Carbon handlebars, Carbon rear fender, carbon air scoopy, DIY drag bar, Pizza pan wheel covers, and saggy * headlight frame.
Ditched my saggy * for a nice LED headlight, This picture was taken mid air ride install, i was having the hardest of time getting the carb to clear everthing aired up and down. i got it doe
Carbon Front fender was added, Zoomania carbon half face and zoomania carbon key cover. My battery box got nicked in the front and cracked and the cover was the best solution.
Okay, so that was summer 2014, i was over my gy6 at this point after building and riding my mina spree. i knew i needed a 2T power plant. sourced a zuma motor and harness off total ruckus for $200 First "mod" was a KN fatty hub. fit like a glove so i packed it up and sent it to Evan at FLP to get the original bolt pattern shaved off and 4x90 drilled in
Evan and i worked up a beautiful wheel set for the 2T build, 12x4 front and 12x6 rear 2pc wheels.
With the hub bolted, this was pre polishing..
Alittle Black Diamond goes a long way
i was able to make the Mojo Customs Bolt on SKINNY mount work with the 12x6 with minimal cutting
i picked up this blue rear frame to hold my old gy6 motor, I was just using it for mock up on the zuma motor. Ill be building that bike up as well this winter/spring as a second bike for myself and a ride for my girlfriend. The White wall is temp
got the zuma motor mounted to my bike. i was able to use my GY6 eye to eye bracket on the new set up with some trimming.
Got my ATR front hub polished up, installed composimo lowering springs up front and i had my rolling chassis.
it wont sit so racked once i get the exhaust on.
OKAY all caught up. as now recently my Stage6 RT cylinder kit, crankshaft and exhaust have all arrived at the ScooterSwapShop compound so if Brandon would like to add some nice HD shots of the parts he can