Honda Spree and Elite 50 Forums

Hello, my buddy downsouthdio has an elite SR build going on that I'm giving him a hand with. We swapped the elite motor with a kymco zx-50 motor and the build plans are the following:


50mm Bore
28mm Carb
Ct Mani
Pg long


Here are some pics of the build so far just with motor swap not parts yet installed

Sweet! Man you guys are active down there!

Haha thanks b-man building bikes is deffinitely something we love to do down here. Not many people are into what we do though there's only a hand full that are really into it like my buddies and I. But I will keep posting updates on this build as we go so stay tuned

The Kymco block is fun, moped hospital by you guys use to make custom cut gears for the zx50/sc10as gear box.
My only problem with using them is how far back it sits the rear shock, especially if you have an extended engine mount. I had to use a g9 shock mount, weld in a g9 upper shock mount, and space it outboard a bit.
Here's my spree with one of the 5 shocks I tried out...

Use the Kymco zx50 fuel cell on the elite, it's a little bigger and fits.

Wow that spreezee is bad !!! Thanks for the info, guess ill be swapping tanks Is that a fabrizi pipe?

I never do it anymore but the Kymco zx50 intake is different too, it's a little more direct flow onto the reed block. Do you have a 50mm kit yet? If not let me try to find my old one I used on the zx50 and send it to you.

I found the piston so far. If I don't find the rest I'll send you the piston at least so you have a spare. I'm sure the cylinder and head are just sitting in a box somewhere.