50x50 98cc stroker build
Moderator: Moderator
Re: 50x50 98cc stroker build
hi forum.
still tuning, but took the spreedio for a 22 mile ride.
this motor is fast! plenty of power, at half throttle it just takes off.
I was riding with a friend that has a 90 cc ruckus clone. and I know it goes over 60 mph. on the open road I left him a mile behind. Lol. he was surprised, so was I.
tuning takes time which I don't have much of. But I'm very close to getting it perfectly tuned.
I may post some videos? or maybe GPS top speed. will keep you posted.
still tuning, but took the spreedio for a 22 mile ride.
this motor is fast! plenty of power, at half throttle it just takes off.
I was riding with a friend that has a 90 cc ruckus clone. and I know it goes over 60 mph. on the open road I left him a mile behind. Lol. he was surprised, so was I.
tuning takes time which I don't have much of. But I'm very close to getting it perfectly tuned.
I may post some videos? or maybe GPS top speed. will keep you posted.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: 50x50 98cc stroker build
bro wat tops know! im also excited on my 98cc stroker!
Re: 50x50 98cc stroker build
Hi.I still have to take it easy, Plus not too many places to do a high speed test. I did get a chance to open it up on a straight Road I did not have the GPS with me if I were to guess I only went about 65 mph. still tuning to get it to 70 +.xxgamerxx wrote:bro wat tops know! im also excited on my 98cc stroker!
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: 50x50 98cc stroker build
bro any update im getting excited on ur project
Re: 50x50 98cc stroker build
Hi forum.
I have a motor noise on 50mm. i don't know if it's piston slap or what? noise is like a tick. please check video noise starts at 14 sec.
https://www.youtube.com/watch?v=aRiS1CbVTmE
The compression is around 220psi. I'm also using 100 octane racing fuel. Squish it is at 1.2
I did remove the head to check the piston and the bore everything looks good. No dents or scratches. Motor has about 150 miles.
The motor runs great, and has power. 65+mph.
any advice would be greatly appreciated.
I have a motor noise on 50mm. i don't know if it's piston slap or what? noise is like a tick. please check video noise starts at 14 sec.
https://www.youtube.com/watch?v=aRiS1CbVTmE
The compression is around 220psi. I'm also using 100 octane racing fuel. Squish it is at 1.2
I did remove the head to check the piston and the bore everything looks good. No dents or scratches. Motor has about 150 miles.
The motor runs great, and has power. 65+mph.
any advice would be greatly appreciated.
- Attachments
-
- 20160517_202354.jpg (140.06 KiB) Viewed 7617 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
- Wheelman-111
- Moderator
- Posts: 11321
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: 50x50 98cc stroker build
Greetings:
Yikes!! That works out to 15:1 compression ratio. This is in Diesel territory (14 to 22:1). Unlike Herr Diesel's engines however, the top-end bearing may not be up to the task of supporting that level of compression for very long. I'd suspect a little slop has developed in the little end, maybe the crank end as well. This can be checked and compared to FSM specs.
Yikes!! That works out to 15:1 compression ratio. This is in Diesel territory (14 to 22:1). Unlike Herr Diesel's engines however, the top-end bearing may not be up to the task of supporting that level of compression for very long. I'd suspect a little slop has developed in the little end, maybe the crank end as well. This can be checked and compared to FSM specs.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: 50x50 98cc stroker build
Thanks Wheelman.
I did a search before posting and came up with ring wear, piston slap. all were associated with high mileage . I'm still confused because I have low miles.
I took it apart and everything looks good. Everything seems very tight.
My best guess would be Rings did not seat properly?
I'll take care of that compression right away.
When all else fails use a repair manual. thanks Wheelman. I need to know those specs
I did a search before posting and came up with ring wear, piston slap. all were associated with high mileage . I'm still confused because I have low miles.
I took it apart and everything looks good. Everything seems very tight.
My best guess would be Rings did not seat properly?
I'll take care of that compression right away.
When all else fails use a repair manual. thanks Wheelman. I need to know those specs
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: 50x50 98cc stroker build
Thank you Mr G. Definitely changing out the piston and rings.
I believe, I didn't do the "important" proper heat cycling and breakin.
It's not good to be in a rush. to see how fast it will go. Proper braking will save your cylinder or piston.
I believe, I didn't do the "important" proper heat cycling and breakin.
It's not good to be in a rush. to see how fast it will go. Proper braking will save your cylinder or piston.
- Attachments
-
- 20160519_203544.jpg (146.41 KiB) Viewed 7588 times
Last edited by ped on Fri May 20, 2016 1:55 am, edited 2 times in total.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: 50x50 98cc stroker build
I'm going to quote someone in the Forum.
"Out with the old In with the new sister wife" LMAO.
I mean out with the old OKO in with the new polini. from scooter Swap Shop.
After proper brakin
"Out with the old In with the new sister wife" LMAO.
I mean out with the old OKO in with the new polini. from scooter Swap Shop.
After proper brakin
- Attachments
-
- 20160519_205038.jpg (144.55 KiB) Viewed 7587 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: 50x50 98cc stroker build
Hi forum.
Turned out the motor noise, was it had waaay too much compression.
motor runs really good. it does get a little hot at wot.
I'm working on the Jetting 122 m, 40p, 24oko.
Turned out the motor noise, was it had waaay too much compression.
motor runs really good. it does get a little hot at wot.
I'm working on the Jetting 122 m, 40p, 24oko.
- Attachments
-
- 20160814_115830.jpg (196.99 KiB) Viewed 7493 times
-
- 20160814_115823.jpg (180.9 KiB) Viewed 7493 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: 50x50 98cc stroker build
hi forum. Top speed so far.
I have to change out the 24mm oko carb, and put in the 26mm polini carb from scooter swap shop.
I have to change out the 24mm oko carb, and put in the 26mm polini carb from scooter swap shop.
- Attachments
-
- 20160814_115753.jpg (139.23 KiB) Viewed 7479 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
-
- Goped
- Posts: 54
- Joined: Wed Aug 03, 2016 12:57 am
- Location: Lethbridge Alberta Canada
Re: 50x50 98cc stroker build
pictures words
very clear photos and great build by the looks of it.
very clear photos and great build by the looks of it.
Re: 50x50 98cc stroker build
Thanks mr. G. It's actually a smooth ride, but it's also very fast.graphite9 wrote:nice work ped! that thing has to be a beast to ride.
- Attachments
-
- 20160819_203940.jpg (182.08 KiB) Viewed 7495 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: 50x50 98cc stroker build
Thanks z50. This is my first Stroker build. it took a while to put it all together, but I'm happy with the results. here's my top speed so far.z50 chopper wrote: pictures words
very clear photos and great build by the looks of it.
- Attachments
-
- 20160819_193507.jpg (193.77 KiB) Viewed 7495 times
-
- 20160814_115716.jpg (142.18 KiB) Viewed 7495 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: 50x50 98cc stroker build
75mph, can you hokd that for a long while say 20 minute comute?
1993 ch80, swapped with a ch250
2021 DRZ400sm
2021 DRZ400sm