Page 1 of 1
1 turd + 1 turd=
Posted: Sat Nov 21, 2015 6:52 am
by Ruckenstein
I've been trying to clean up my back yard and shed so I decided to combine a couple $30 turds and scrap/sell the rest.
Turd 1 is a 1984 Aero 50. The 2nd turd is an aero 80. I swore I would never touch another Aero 80 but since I always seem to lie to myself concerning trivial scooter decisions, I figured I'd make this the last Nh80. Another fib?? Naaaah.
I've always liked the first aero 50 design and the plastic on this one is actually pretty good. The harness was shot so I'll be swapping the nh80's after we get the motor mount fabbed up. I'm also considering swapping the forks if possible. My neighbor who is helping me has all kinds of goodies to chop and weld. I would really like to keep the aero 80 wheels.
Turd 1
Re: 1 turd + 1 turd=
Posted: Sat Nov 21, 2015 11:30 am
by patthesoundguy
Mythbusters proved you can actually Polish a turd... I think you will have a really cool rig with this project. Can't wait to see how you make out.
Re: 1 turd + 1 turd=
Posted: Sat Nov 21, 2015 1:13 pm
by Ruckenstein
patthesoundguy wrote:Mythbusters proved you can actually Polish a turd... I think you will have a really cool rig with this project. Can't wait to see how you make out.
Have they ever painted one??
Re: 1 turd + 1 turd=
Posted: Sat Nov 21, 2015 2:24 pm
by motormike
Ruckenstein wrote:Have they ever painted one??
This could be my favorite build...at least the best one to come out of Bell Buckle.
Re: 1 turd + 1 turd=
Posted: Sat Nov 21, 2015 8:49 pm
by Wheelman-111
Greetings:
Mike, is that a secret inside TN reference? Do tell.
Re: 1 turd + 1 turd=
Posted: Sat Nov 21, 2015 9:44 pm
by motormike
Wheelman-111 wrote:Greetings:
Mike, is that a secret inside TN reference? Do tell.
Not really Wheelieman,...Ruckenstein lives somewhere within scooter distance from Bell Buckle, TN.
We've had opportunity to do some biz here in the big city,
and have shared a fun night with some Canadians, i.e. Arcade Fire... 
Re: 1 turd + 1 turd=
Posted: Wed Nov 25, 2015 10:02 am
by Ruckenstein
So I'll be trying to drop this turd down a bit after seeing the awesome melody drop. Looking for some good advice on where and how much is possible. Of course the fenders don't fit so I gotta use the 80 fender.
The races and bearings will need to be accounted for. I'll have to do a little swapping somehow.
Re: 1 turd + 1 turd=
Posted: Wed Nov 25, 2015 5:07 pm
by Bobspeed
Ooh there's a difference in forks, your best bet is strip the forks to bits to see how they work, and where you can modify them, think there the same as the ones on my 125 lead? I haven had chance to look at mine to help you fella
Re: 1 turd + 1 turd=
Posted: Wed Dec 02, 2015 10:04 am
by Ruckenstein
So my thoughts on lowering the aero 80 front is very doable. I might need to find some springs though. I forgot my measure.
but I'll take some tomorrow I hope.
So the idea is to chop off the area covered by the duct tape and to REMOVE the area BETWEEN the masking tape. I will have to shorten the inner shock bolt by the amount of metal removed from the masking tape on the fork. The removal of the lower duct tape covered area is to help keep it from bottoming out. Will need find some shocks/coils the are gonna let me be comfortable at a DirtNastyLow level.
Any comments are welcome. Thank the Good Lord My neighbor has the tools and skills to cut and weld.