elite 50 running slower than ever!

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
guen84
Spree
Spree
Posts: 233
Joined: Fri Oct 15, 2010 3:51 pm

elite 50 running slower than ever!

Post by guen84 »

:newb: I have a 2001 elite 50s i derestricted, added a no restriction air filter and jetted to 100, and was running great approx 39mph. Then i ordered some mods. I put on a oko variator kit 2k clutch springs, 1k center spring and went up to 66g roller weights. I got up to about 41 mph. Then i tryed 8.44 final drive gears w/42g weights and now im going approx 37mph. Ive also tryed every roller weight combination i can with a 36 pack of weights. Compression is at 133. I weigh approx 170lbs. My cousins running 47 mph with 2000 elite 50sr. With same oko variator and 46g weights. He weighs appox 135lbs.... Will 35lbs make this much of a difference or did i majorly screw something up? I know 8.44 gears is a little low for stock 50cc but 72cc cortesa is coming this winter (hopefully). What did i do??? Need to get one last good scoot in before the snow comes!!!!
2001 Elite,50mm bbk, 44.1 mm mini stroker
28mm oko carb, no restriction air filter, ct intake
zx clutch, polini for ruckus vari, pg long, 7.7 gears

1999 Elite 51mm bbk, oko vari, sef ramp plate, 8.44 gears
User avatar
fastplastic
CB900F
CB900F
Posts: 1161
Joined: Tue May 11, 2010 7:37 pm
Location: Manistee, MI

Re: elite 50 running slower than ever!

Post by fastplastic »

when was the last time you put a new belt on it?
User avatar
guen84
Spree
Spree
Posts: 233
Joined: Fri Oct 15, 2010 3:51 pm

Re: elite 50 running slower than ever!

Post by guen84 »

measured the belt at 14.5mm its right there, will that make that big of difference?
2001 Elite,50mm bbk, 44.1 mm mini stroker
28mm oko carb, no restriction air filter, ct intake
zx clutch, polini for ruckus vari, pg long, 7.7 gears

1999 Elite 51mm bbk, oko vari, sef ramp plate, 8.44 gears
User avatar
fastplastic
CB900F
CB900F
Posts: 1161
Joined: Tue May 11, 2010 7:37 pm
Location: Manistee, MI

Re: elite 50 running slower than ever!

Post by fastplastic »

it has for me but i didnt have the same setup as u
User avatar
evilone
Board Supporter
Board Supporter
Posts: 3205
Joined: Sun May 18, 2008 7:26 pm
Location: Portage Michigan

Re: elite 50 running slower than ever!

Post by evilone »

Not enough power to run them gears, install them with the corsa.
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis

I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
User avatar
guen84
Spree
Spree
Posts: 233
Joined: Fri Oct 15, 2010 3:51 pm

Re: elite 50 running slower than ever!

Post by guen84 »

yup gonna swap them gears back to stock, until i get the bbk. but not much of a increase with the rest of the setup up. any ideas why?
2001 Elite,50mm bbk, 44.1 mm mini stroker
28mm oko carb, no restriction air filter, ct intake
zx clutch, polini for ruckus vari, pg long, 7.7 gears

1999 Elite 51mm bbk, oko vari, sef ramp plate, 8.44 gears
User avatar
evilone
Board Supporter
Board Supporter
Posts: 3205
Joined: Sun May 18, 2008 7:26 pm
Location: Portage Michigan

Re: elite 50 running slower than ever!

Post by evilone »

guen84 wrote:measured the belt at 14.5mm its right there, will that make that big of difference?
Service limit is 15mm, a new belt might help. A belt within specs will ride higher on variator than a worn belt. 35 pounds of weight difference is probably contributing to the lower speed some but not much.
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis

I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
Post Reply