Clutchs

spree-rider · Post by **spree-rider** » Sun May 08, 2011 7:13 pm

Do sb50s or sa50's clutches fit on a spree w/o modding them? And does the sb50 clutch have aftermarket clutch crab springs? im looking for 2k springs.

Trafficjamz · Post by **Trafficjamz** » Sun May 08, 2011 7:30 pm

sb50 (elite e) clutches will fit with no modification. But has no aftermarket grab springs available.

sa50 (elite s) clutches can fit, but require heavy mods to the kicker cover to fit, and spin the wrong direction.

here is the link to what you are trying to do .
viewtopic.php?f=8&t=14539

spree-rider · Post by **spree-rider** » Sun May 08, 2011 7:46 pm

is it even possible to fix the the reverse spinning issue? i cut my cover like spreetard did.

Trafficjamz · Post by **Trafficjamz** » Sun May 08, 2011 8:54 pm

spree-rider wrote:is it even possible to fix the the reverse spinning issue? i cut my cover like spreetard did.

No not really.

Petrock's 1984 Spree · Sun May 08, 2011 8:58 pm

With that sa50 rear pulley on there do you think you could do the front pulley mod and the taz gears with a bbk?

Or would that still be slow as a snail. Unless you use some real strong grabber springs

Trafficjamz · Post by **Trafficjamz** » Sun May 08, 2011 9:06 pm

Petrock's 1984 Spree wrote:With that sa50 rear pulley on there do you think you could do the front pulley mod and the taz gears with a bbk?

Or would that still be slow as a snail. Unless you use some real strong grabber springs

The rear pulley from a sa50 would never fit.

The clutch is the only part that is sa50

We used 3k grabs and it was still slow.

spree-rider · Post by **spree-rider** » Sun May 08, 2011 9:38 pm

if i read spreetards thread correctly he used a sa50 clutch? how did he do that?

Trafficjamz · Post by **Trafficjamz** » Sun May 08, 2011 9:41 pm

spree-rider wrote:if i read spreetards thread correctly he used a sa50 clutch? how did he do that?

Even though it spins the opposite direction, the clutch will still engage.

spree-rider · Post by **spree-rider** » Sun May 08, 2011 9:43 pm

any downside to it being like that or does it still work normal.

Trafficjamz · Post by **Trafficjamz** » Sun May 08, 2011 9:46 pm

spree-rider wrote:any downside to it being like that or does it still work normal.

Seems to work just fine

spree-rider · Post by **spree-rider** » Sun May 08, 2011 9:48 pm

is this the only part of the sa50 that i need?
http://cgi.ebay.com/ebaymotors/CLUTCH-S ... ccessories

Trafficjamz · Post by **Trafficjamz** » Sun May 08, 2011 10:19 pm

spree-rider wrote:is this the only part of the sa50 that i need?
http://cgi.ebay.com/ebaymotors/CLUTCH-S ... ccessories

yes

spree-rider · Post by **spree-rider** » Sun May 08, 2011 11:52 pm

have any laying around?

Trafficjamz · Post by **Trafficjamz** » Mon May 09, 2011 12:42 am

spree-rider wrote:have any laying around?

I may have a couple stock ones.

martynkim · Post by **martynkim** » Mon May 09, 2011 12:50 am

me too

Honda Spree and Elite 50 Forums

Clutchs

Clutchs

Re: Clutchs

Re: Clutchs

Re: Clutchs

Re: Clutchs

Re: Clutchs

Re: Clutchs

Re: Clutchs

Re: Clutchs

Re: Clutchs

Re: Clutchs

Re: Clutchs

Re: Clutchs

Re: Clutchs

Re: Clutchs