reed valves or bad seals ???
Moderator: Moderator
Re: reed valves or bad seals ???
What do you have the plug gap set at?
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: reed valves or bad seals ???
between 25 and 30 25 lose but 30 don't go in
its running now no good but its a start
what i think happen is because i use a dome piston & the cylinder for that piston and a small packet head the compression was to high .. my gage mite be off got it to run now
i have to fix the crab i strip the hole out not gone just bad enuff to be lose and cant get the crab set have a air leek but at less it will start
well that what i get for buying 3 junk spree to make one
and its ben fun
swimming free
its running now no good but its a start
what i think happen is because i use a dome piston & the cylinder for that piston and a small packet head the compression was to high .. my gage mite be off got it to run now
i have to fix the crab i strip the hole out not gone just bad enuff to be lose and cant get the crab set have a air leek but at less it will start
well that what i get for buying 3 junk spree to make one
and its ben fun
swimming free
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: reed valves or bad seals ???
that sucks, i stripped the bolt hole on my carb too I have learned my lesson about torque, luckily it only eat half the threads off so it still bolts without a leak I am glad you got her going man I know you have been pulling your hair out
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: reed valves or bad seals ???
and then they made taps
so it is not a big deal to fix just got to hope it stop raining out so i can get to it.
swimmingfree
so it is not a big deal to fix just got to hope it stop raining out so i can get to it.
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet