Petcock Problem ?
Moderator: Moderator
Petcock Problem ?
So when the Spree sits for 2 weeks or longer it won't start because it is not getting any fuel .
If I remove the fuel line from the petcock and try and start it no fuel comes out of the petcock . If I give it a gravity feed of fuel in a bottle it will start and the petcock will pump out fuel .
After this I can hook up the fuel line and the Spree runs and starts like a champ .
I replaced the filter in the petcock with a new one .
Any Ideas ?
If I remove the fuel line from the petcock and try and start it no fuel comes out of the petcock . If I give it a gravity feed of fuel in a bottle it will start and the petcock will pump out fuel .
After this I can hook up the fuel line and the Spree runs and starts like a champ .
I replaced the filter in the petcock with a new one .
Any Ideas ?
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
Re: Petcock Problem ?
This is what I did to my Spree. Remove petcock and fitted earl AN fitting. This method will eliminate the need to use vacuum to open and close the valve in the petcock. I have no issues with this method and will never go back to using a petcock. Just my .02 cents.
Sprite
Sprite
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: Petcock Problem ?
Someday................. There will be a tank of gas under your scoot. I suggest keeping it empty as possible if you go with this.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
Re: Petcock Problem ?
What would cause it to do this, a bad carb/float, a leak or bad line? The original owner has modified it this way and its been going strong for 8 long years. In that case I will add a shut off valve when not being used for long period. BTW, I'm a gear head so I tend to catch tiny problems faster than your average person. However, thanks for raising that issue.
Re: Petcock Problem ?
You can only be lucky so long before the law of averages catches up to you, then there will be a disaster and you will be held accountable because you knew it was unsafe.
Bear 45/70
![Image](http://i145.photobucket.com/albums/r206/Bear-45-70/Emoticons/6.jpg)
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
![Image](http://i145.photobucket.com/albums/r206/Bear-45-70/Emoticons/6.jpg)
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
Re: Petcock Problem ?
Thanks for the concern people need to get me a petcock but elite no fitty on my spreee.
Re: Petcock Problem ?
so any ideas ?
is the petcock shot ?
is the petcock shot ?
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: Petcock Problem ?
Ute, you need to try to clean your petcock. You may not be able to do so. If you cannot it needs to be replaced.
Sprite, fix that issue. It is only a band aid. As we all know, Band aids fall off.
BTW, don't ask me if I have a petcock. I do but, I only give them away if someone needs one. I never guarantee the function of them. I usually do this when someone buys something from me. They are way too unreliable used.
Sprite, fix that issue. It is only a band aid. As we all know, Band aids fall off.
BTW, don't ask me if I have a petcock. I do but, I only give them away if someone needs one. I never guarantee the function of them. I usually do this when someone buys something from me. They are way too unreliable used.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
Re: Petcock Problem ?
I just purchased a new petcock from eBay. LOL
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: Petcock Problem ?
Glad to hear you bought a petcock. Just think of the possible disaster water heater in the garage, gas on the floor. Yikes! ![twothumbs :2thumbs:](./images/smilies/icon_thumbsup.gif)
![twothumbs :2thumbs:](./images/smilies/icon_thumbsup.gif)
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
-
- Spree
- Posts: 257
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
Re: Petcock Problem ?
BTW, my Project Sprite is out of gas right now. Having too much fun while breaking her in and "wow" that torque feels good!
Re: Petcock Problem ?
i also eliminated my piece of sh__ petcock and welded a barb fitting on.this was about a year ago and it works like a charm.i put a inline cutoff valve on it so the gas doesnt leak out.i just reach up under the plastic and cut it off when done riding.
Re: Petcock Problem ?
When you say clean the petcock any tips or tricks ?
like I said I did replace the filter
Just carb cleaner ..spray the crap out of it ?
like I said I did replace the filter
Just carb cleaner ..spray the crap out of it ?
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: Petcock Problem ?
ute wrote:When you say clean the petcock any tips or tricks ?
like I said I did replace the filter
Just carb cleaner ..spray the crap out of it ?
Pretty much your only option. Also blow into it by mouth (if you can stand it) No compressed air it will blow it out.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts