taz's carb kit tuning truble
Moderator: Moderator
taz's carb kit tuning truble
Looking for some help tuning my new carb.
just received the carb kit from taz today after installing the carb took a long time to start (filling the bowl) then when i did get it started with the chock open and revved high pushed the chock down and died.
cant get it run for more then a few seconds. any one who has this carb how did you get it to run right?
just received the carb kit from taz today after installing the carb took a long time to start (filling the bowl) then when i did get it started with the chock open and revved high pushed the chock down and died.
cant get it run for more then a few seconds. any one who has this carb how did you get it to run right?
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: taz's carb kit tuning truble
Have you adjusted the idle screw? That's probably why it's revving so high
Re: taz's carb kit tuning truble
back and forth but no help.
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: taz's carb kit tuning truble
Check to make sure you installed the carb slide properly. Sometimes if reversed it'll do what yours is doing...
Can you post a pic of your carb, not sure what carb comes in Taz's kit...
Can you post a pic of your carb, not sure what carb comes in Taz's kit...
Re: taz's carb kit tuning truble
its the oko 21mm
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
Re: taz's carb kit tuning truble
u could have an air leak too maybe the rubber boot is too loose or to tight......
Re: taz's carb kit tuning truble
I didn't know tax sold such a kit....does anyone have pics of it or any info on it...Thanks
01 Elite Sr
72cc Polini Corsa
21mm Pwk carb
V8 Typhoon exh
8:44:1 gears
72cc Polini Corsa
21mm Pwk carb
V8 Typhoon exh
8:44:1 gears
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
Re: taz's carb kit tuning truble
If it runs best with the idle mixture clear out the that means that something is too rich. Have you contacted Taz, he is good about customer service?
Bear 45/70
![Image](http://i145.photobucket.com/albums/r206/Bear-45-70/Emoticons/6.jpg)
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
![Image](http://i145.photobucket.com/albums/r206/Bear-45-70/Emoticons/6.jpg)
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: taz's carb kit tuning truble
What is taz's eBay seller name?
01 Elite Sr
72cc Polini Corsa
21mm Pwk carb
V8 Typhoon exh
8:44:1 gears
72cc Polini Corsa
21mm Pwk carb
V8 Typhoon exh
8:44:1 gears
Re: taz's carb kit tuning truble
chopchop*123
Bear 45/70
![Image](http://i145.photobucket.com/albums/r206/Bear-45-70/Emoticons/6.jpg)
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
![Image](http://i145.photobucket.com/albums/r206/Bear-45-70/Emoticons/6.jpg)
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: taz's carb kit tuning truble
Ok I just saw this thread. Anytime you have the choke on the idle will go up. So after you push the choke down the bike just dies correct? Check the main jet to make sure it is screwed in all the way. Sometimes from the maker they are loose. Once you have done that check back to this thread. Now you dont have to pull the whole pan off the carb. There is a large threaded plug on the bottom. Just remove that and you will see the jets. Check the main jet to see if it is tight.
Taz
Taz
Re: taz's carb kit tuning truble
I will check the main jet when i get home from work today. with the choke pulled up it revs supper high as in its engaging the clutch and trying to move. then when pushing the chock down it will die. also it is taking a super long time to start. I know is has something to do with my install not the product. thanks for all the help.
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
Re: taz's carb kit tuning truble
throttle cable could be pulled/pinched it sucks happened to me before wont run with out choke then with it on it would move took a lil bit of my leg with it lol
Re: taz's carb kit tuning truble
Found an air leak. runs great now. thanks for all the help guys