breaking down and buying a new exhuast. please help
Moderator: Moderator
-
- Goped
- Posts: 88
- Joined: Mon Feb 06, 2012 7:37 pm
- Location: Carbondale IL.
breaking down and buying a new exhuast. please help
hello i recently bought a sickly 87 honda elite. i was gonna try to diy the exhaust to de-restrict it but i hear pros and cons and not sure if i really want to ruin it so what i was wanting to do is buy a new unrestricted exhaust that comes from another honda model. I have been receiving help from evilone here on this forum but i just cant seem to find his email that told me everythig i needed to know about which exhaust to buy. so if someone could please help me and list what years and model exhaust's fit my 1987 Honda Elite SE50P (heavily restricted). any help i can get quickly would be greatly appreciated, im low on money and if i dont buy the exhaust today, i worry it could be months before i have any extra money around again. thank you all for your time. Im gonna try again to put a pic of my baby on here they never seem to work when i do but ill hold my breath this time .
-
- Goped
- Posts: 88
- Joined: Mon Feb 06, 2012 7:37 pm
- Location: Carbondale IL.
Re: breaking down and buying a new exhuast. please help
found this on ebay with free shipping, would this fit???? if so i wanna order right now just hope someone knows..
HONDA Tact Spree PAL Elite AF09 AF05E Engine - No Restricted Exhaust Pipe NEW
HONDA Tact Spree PAL Elite AF09 AF05E Engine - No Restricted Exhaust Pipe NEW
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: breaking down and buying a new exhuast. please help
Greetings:
That fEeBaY seller is trying to attract the attention of ALL Honda's 2-stroke owners with his ad. Something that fits the Spree will NOT fit your '87 SE50, despite the fact that their (very) different engines share the AF05E engine code designation. Judging from the pic, the exhaust flange appears to point straight back, which is different from the 45-degrees to the right on your Elite's SE/05 jug.
However, This may fit.
That fEeBaY seller is trying to attract the attention of ALL Honda's 2-stroke owners with his ad. Something that fits the Spree will NOT fit your '87 SE50, despite the fact that their (very) different engines share the AF05E engine code designation. Judging from the pic, the exhaust flange appears to point straight back, which is different from the 45-degrees to the right on your Elite's SE/05 jug.
However, This may fit.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
- Goped
- Posts: 88
- Joined: Mon Feb 06, 2012 7:37 pm
- Location: Carbondale IL.
Re: breaking down and buying a new exhuast. please help
im glad you answered, would you happen to know which mopeds made by honda that i could swap mufflers with? i am just looking to derestrict it a bit more without having to do anything like drilling into the muffler unless you think that will work then im willing and able. i appreciate your response wheelman
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: breaking down and buying a new exhuast. please help
Greetings:
Exhausts from Aero, 1985-87 only, and SE50 and SA50 Elite models 1987-1993 ONLY will fit your '87 Elite. Note that the 1988-'89 Elite "E" models are basically Spree blocks. Their exhausts do NOT fit yours.
Exhausts from Aero, 1985-87 only, and SE50 and SA50 Elite models 1987-1993 ONLY will fit your '87 Elite. Note that the 1988-'89 Elite "E" models are basically Spree blocks. Their exhausts do NOT fit yours.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
- Goped
- Posts: 88
- Joined: Mon Feb 06, 2012 7:37 pm
- Location: Carbondale IL.
Re: breaking down and buying a new exhuast. please help
i would like to buy a new exhaust today, before something pops up that takes my scooter money away so today is a must. if anybody could direct me to an ebay ad or any place that has a muffler that would bolt right up to my 87 honda elite se50p im ready to pay right now and could really use some help from people with alot more knowledge on these mopeds than me. thank you guys for all being so kind to me and for putting up with my extreme ignorance.
Re: breaking down and buying a new exhuast. please help
wheelman, isnt the leovince 4447 for the 87 elite, that was the 4445. just asking.
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: breaking down and buying a new exhuast. please help
Greetings:
QUITE RIGHT - the Aero/Early Elite use the #4447 kit. I hadn't noticed when I cited the link from Scooter-Center. Good catch. I'm not sure how many of either kit are left gathering German dust on the back shelves. Probably not many...
QUITE RIGHT - the Aero/Early Elite use the #4447 kit. I hadn't noticed when I cited the link from Scooter-Center. Good catch. I'm not sure how many of either kit are left gathering German dust on the back shelves. Probably not many...
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: breaking down and buying a new exhuast. please help
im trying to get one from sip, i made the order and it went from in stock to out, so i either got their last one or someone ordered around the same time as me. only other exhaust im able to get my hands on is stock from a dealer.
-
- Goped
- Posts: 88
- Joined: Mon Feb 06, 2012 7:37 pm
- Location: Carbondale IL.
Re: breaking down and buying a new exhuast. please help
Will this fit my 87 honda elite
1989 89 HONDA ELITE R 50 SCOOTER SE50 SB EXHAUST MUFFLER se
1989 89 HONDA ELITE R 50 SCOOTER SE50 SB EXHAUST MUFFLER se
-
- Goped
- Posts: 88
- Joined: Mon Feb 06, 2012 7:37 pm
- Location: Carbondale IL.
Re: breaking down and buying a new exhuast. please help
and i forgot the most important part, is this one deregulated???
1989 89 HONDA ELITE R 50 SCOOTER SE50 SB EXHAUST MUFFLER SE
1989 89 HONDA ELITE R 50 SCOOTER SE50 SB EXHAUST MUFFLER SE
Re: breaking down and buying a new exhuast. please help
This first one looks like the one you need BUT it is canadian so i'm not 100% positive.
http://www.ebay.com/itm/1989-89-HONDA-E ... _3988wt_95
http://www.ebay.com/itm/87-Honda-Elite- ... 797wt_1177
http://www.ebay.com/itm/1989-89-HONDA-E ... _3988wt_95
http://www.ebay.com/itm/87-Honda-Elite- ... 797wt_1177
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
-
- Goped
- Posts: 88
- Joined: Mon Feb 06, 2012 7:37 pm
- Location: Carbondale IL.
Re: breaking down and buying a new exhuast. please help
by canadian do you mean that they could possibly be restricted also, or did they make different parts ?>?? sorry im kinda ignorant on the subject
-
- Goped
- Posts: 88
- Joined: Mon Feb 06, 2012 7:37 pm
- Location: Carbondale IL.
Re: breaking down and buying a new exhuast. please help
the first link was the one i was looking at buying, what questions should i ask the seller to make sure it is the one i want?
Re: breaking down and buying a new exhuast. please help
And i'm ignorant about non-usa models. It looks exactly like the muffler you need, the pipe is not one size all the way down which is what makes the se50p muffler restricted. I'm 95% sure based on the pic.Beansdaddy09 wrote:by canadian do you mean that they could possibly be restricted also, or did they make different parts ?>?? sorry im kinda ignorant on the subject
The only thing that makes me 5% un-sure is the "SB" in the title.
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.