spree wont idel dies out
Moderator: Moderator
-
- Noob
- Posts: 19
- Joined: Mon Apr 02, 2012 10:17 pm
- Location: USA
spree wont idel dies out
hi i have 87 spree barn find got it to start rides fine but wont idel right at stand still bogs out what can i do to fix it
Re: spree wont idel dies out
Adjust the idle screw in for starters, also check/replace the plug if it's been sitting. Clean air filter. Check the fuel filter.
-
- Goped
- Posts: 64
- Joined: Mon Mar 19, 2012 2:16 pm
- Location: San Diego
Re: spree wont idel dies out
Do this:
http://hondaspree.net/wiki/index.php5?t ... ture_Guide
Afterwards, try tuning it.
http://hondaspree.net/wiki/index.php5?t ... ts_-_Spree
http://hondaspree.net/wiki/index.php5?t ... ture_Guide
Afterwards, try tuning it.
http://hondaspree.net/wiki/index.php5?t ... ts_-_Spree
1986 NB50
Re: spree wont idel dies out
If the pilot jet is clogged no amount of fiddling will fix idle. It is a VERY small hole and plugs easily.
-SP
-SP
Re: spree wont idel dies out
True but without try to clean the carb he will never clear it.speedy25 wrote:If the pilot jet is clogged no amount of fiddling will fix idle. It is a VERY small hole and plugs easily.
-SP
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: spree wont idel dies out
Yeah def. clean the carb, several times actually, 3rd is usually the charm. Use compressed air for jet passages. Some here have.had great results with sonic cleaners. Good luck man
Last edited by ragtop89 on Mon Apr 09, 2012 12:30 am, edited 1 time in total.
-
- Noob
- Posts: 19
- Joined: Mon Apr 02, 2012 10:17 pm
- Location: USA
Re: spree wont idel dies out
cleaned the carb 2 times runs grate but still wont idal right
Re: spree wont idel dies out
And you adjusted the idle screw? Have you looked into adjusting the mixture screw?
Re: spree wont idel dies out
have you downloaded the manual? if not, do so here http://hondaspree.net/wiki/index.php5?t ... ce_Manuals
there's a world of info here. http://hondaspree.net/wiki/index.php5?title=Main_Page
there's a world of info here. http://hondaspree.net/wiki/index.php5?title=Main_Page
taz 50mm bbk, 51g. rollers,1500 c spring
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
-
- Noob
- Posts: 19
- Joined: Mon Apr 02, 2012 10:17 pm
- Location: USA
Re: spree wont idel dies out
thanks to all we did got it going