thank you for the belt sugestion

stucinthe80z · Post by **stucinthe80z** » Thu Jun 28, 2012 7:27 am

hello i am new to the game i am looking for any info on big bore kit s for a nq-50 is there any or will i have to bore the cylinder and put a bigger piston in i know my options are limited becuse of the 10mm conecting pin i also thank you folks for the belt information it wiill go uphills a lot better now i will put about 20 miles on the belt before i try the hill of death love my spree i just do not like to pushin up a hill lol stock 86 spree 1300 on the speedo unrestricted exhaust de carbond but still stock afermarket cdi box high output coil and if can i put a bigger jet in i am running a 65 think it might be littl lean but i put a little oil in with the gas run ssupream and use bel-ray minral oil or is there somthing better thank you the newbee i can get up to 27 to 28 mph better then 25 when i got it i still cant reach the magic 30 but i have ma40 down hill graphite 9 is going to hook me up with a sb reed and a ported manifold

abreen89 · Post by **abreen89** » Thu Jun 28, 2012 9:41 pm

tazland sells bbk for the spree he is currently out of stock but said he would have more in a month or so. His are 48mm bbk. AS for a jet change i would do a plug chop too check and see if you are running right. I us honda GN2 oil and it has been really good to me its 6$ a quart and can be bought at any dealer. But thats just My opinion.

Bear45-70 · Post by **Bear45-70** » Fri Jun 29, 2012 1:01 am

What year Spree? The '84 and '85 will normally not do 30 mph.

stucinthe80z · Post by **stucinthe80z** » Fri Jun 29, 2012 3:06 am

1986
85 pound scooter 240 pound man

stucinthe80z · Post by **stucinthe80z** » Fri Jun 29, 2012 3:12 am

i will buy my next oil from honda but it is very hard to walk past the brand new scooters knowing i can buy one without any pain .on my way to the parts counter could you explain a plug chop

abreen89 · Post by **abreen89** » Fri Jun 29, 2012 11:31 am

wikispreedia.com does a pretty good job heres the link.

http://hondaspree.net/wiki/index.php5?t ... Plug_Chops

abreen89 · Post by **abreen89** » Fri Jun 29, 2012 11:31 am

wikispreedia.com does a pretty good job heres the link.

http://hondaspree.net/wiki/index.php5?t ... Plug_Chops

stucinthe80z · Post by **stucinthe80z** » Sat Jun 30, 2012 10:18 pm

abreen89 wrote:wikispreedia.com does a pretty good job heres the link.

http://hondaspree.net/wiki/index.php5?t ... Plug_Chops

i have used this ver informitive web site

stucinthe80z · Post by **stucinthe80z** » Mon Jul 02, 2012 1:13 am

abreen89 wrote:tazland sells bbk for the spree he is currently out of stock but said he would have more in a month or so. His are 48mm bbk. AS for a jet change i would do a plug chop too check and see if you are running right. I us honda GN2 oil and it has been really good to me its 6$ a quart and can be bought at any dealer. But thats just My opinion.

i was at the HONDA DEALER AND THEY STILL HAVE SB 50 REED VALVE 14100-GS6-010 FOR THE SPREE Ii would not have known if you did not promped me to get factory oil thank you the new bee

abreen89 · Post by **abreen89** » Mon Jul 02, 2012 2:31 am

Glad to hear it

Bear45-70 · Post by **Bear45-70** » Mon Jul 02, 2012 3:20 am

That part is discontinued. Evidently the dealer had them in stock.

stucinthe80z · Post by **stucinthe80z** » Mon Jul 02, 2012 5:37 am

abreen89 wrote:Glad to hear it

yes a was to the dealer said they take a week to get and they are pre pay but they are brand new and and almost imposible for the newbees to find i call my self a newbee becuse i never had to take it apart before it is a honda

abreen89 · Post by **abreen89** » Mon Jul 02, 2012 1:29 pm

Might be worth picking up a couple then

stucinthe80z · Post by **stucinthe80z** » Mon Jul 02, 2012 4:12 pm

abreen89 wrote:Might be worth picking up a couple then

yes i agree

Honda Spree and Elite 50 Forums