early af18 stator and pickup interchange?
Moderator: Moderator
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
early af18 stator and pickup interchange?
Will the '87 stator fit the early af18?
Last edited by eliteguy50 on Tue Sep 04, 2012 12:13 am, edited 1 time in total.
motormike wrote:Errands become adventures.
Re: Small crankshaft Dio dimensions
same like 87 crank. must use 87 driveface/ramplate/boss/14mm nut/12mm pin
will fits early af18 block only!
yes 87 stator must use af18 mag
will fits early af18 block only!
yes 87 stator must use af18 mag
Re: early af18 stator and pickup interchange?
viewtopic.php?f=16&t=12780
Sanjuru seems to be pretty well informed on these engines.
Sanjuru seems to be pretty well informed on these engines.
Re: early af18 stator and pickup interchange?
The right side engine carter for the af18 motor is the same as the 87 elite se50. The pickup is the same too.
Re: early af18 stator and pickup interchange?
Look at the second item on this list:
viewtopic.php?nomobile=1&f=5&t=21871
viewtopic.php?nomobile=1&f=5&t=21871
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: early af18 stator and pickup interchange?
So everything on the right half of the af18 is the same? Doesn't matter if it is big or small crank?sanjuro wrote:Look at the second item on this list:
viewtopic.php?nomobile=1&f=5&t=21871
motormike wrote:Errands become adventures.
Re: early af18 stator and pickup interchange?
Yep, that's right. It's the left side engine carter that has the smaller diameter oil seal for the smaller crank on early af18 motors.
I'll check my spec sheet when I get home to verify.
I'll check my spec sheet when I get home to verify.
Re: early af18 stator and pickup interchange?
Ok, got home and looked up the part numbers and specs.
Oil Seals for AF18 and AF16
91201-GK8-003 (15.6X25.5X7) stator side oil seal
91202-GAH-721 (19.4X31X7) variator side oil seal
The early small crankcase Dio AF18 motor used the (15.6X25.5X7) oil seal on BOTH sides. That's why you have to use a different spec variator for the early Dio motor (1st year for the AF27 and AF28, and used on the Dio SP gen bikes).
Hope that clears it up.
Oil Seals for AF18 and AF16
91201-GK8-003 (15.6X25.5X7) stator side oil seal
91202-GAH-721 (19.4X31X7) variator side oil seal
The early small crankcase Dio AF18 motor used the (15.6X25.5X7) oil seal on BOTH sides. That's why you have to use a different spec variator for the early Dio motor (1st year for the AF27 and AF28, and used on the Dio SP gen bikes).
Hope that clears it up.
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: early af18 stator and pickup interchange?
Yes it willeliteguy50 wrote:Will the '87 stator fit the early af18?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight