84 honda spree starter disengaging
Moderator: Moderator
-
- BMX
- Posts: 44
- Joined: Tue Sep 18, 2012 9:08 am
- Location: Kansas
84 honda spree starter disengaging
Found a good 84 spree, the only thing wrong was the starter was weak/bad.....i changed it out with a 85 spree starter and i can get it started with it but sometimes it doesnt engage and it just spins, and most of the other times it engages a couple of rotations and disengages.....anyone have that problem before and how did you fix it.....thanks for the help
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: 84 honda spree starter disengaging
Likely, you have the wrong starter for the bendix part. Spree starters are different thru the years how many teeth on your original versus the new one?
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: 84 honda spree starter disengaging
also check your bendix i had one that was similar to your problem replaced it with one in better condition and it was good to go.
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
-
- BMX
- Posts: 44
- Joined: Tue Sep 18, 2012 9:08 am
- Location: Kansas
Re: 84 honda spree starter disengaging
Is there a way to check the bendix without taking the side cover off? The bendix is the part that the starter rotates on/against right? What i mean is the starter goes trough a hole and rests against a sprocket in te side cover....that piece right? Sorry i am new to sprees and how they work
Re: 84 honda spree starter disengaging
Just take the side cover off and inspect it lol its like 6 bolts....
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock