Honda elite E swap to se50 forks??
Moderator: Moderator
Honda elite E swap to se50 forks??
hey guys i heard the front end of the 87 elite with the spring type front end is a bolt on affair for the elite e i have.. i was wondering if i fan use my same handlebars or will need to swap to the matching handle bars.. or is this swap really needed? the front end on this scoot looks flimsy thanks steve
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Honda elite E swap to se50 forks??
you can use the same handle bars or swap them, it is your choice.
I would do the fork swap AND do a sa50 front tire/brake setup as well.
I would do the fork swap AND do a sa50 front tire/brake setup as well.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Honda elite E swap to se50 forks??
thanks for the info- im assuming the sa50 wheel got more meat on it? with the elite front end i also could run a metro wheel right?
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Honda elite E swap to se50 forks??
eliteE85 wrote:thanks for the info- im assuming the sa50 wheel got more meat on it? with the elite front end i also could run a metro wheel right?
Yes sir
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Honda elite E swap to se50 forks??
the sa50 is different then the se50 front end? will the sa50 bolt up on my elite e?Trafficjamz wrote:eliteE85 wrote:thanks for the info- im assuming the sa50 wheel got more meat on it? with the elite front end i also could run a metro wheel right?
Yes sir
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Honda elite E swap to se50 forks??
Greetings:
SA, SE are useless terms that confuse only. '94- later SA50 Elites got bigger 95mm drum hubs, much more Whoa-power than '93-earlier scooters. 95mm brake panel means 2.15"x10 TUBELESS Metropolitan wheel fits too. Next-best thing to a disc if you plan to go fast.
SA, SE are useless terms that confuse only. '94- later SA50 Elites got bigger 95mm drum hubs, much more Whoa-power than '93-earlier scooters. 95mm brake panel means 2.15"x10 TUBELESS Metropolitan wheel fits too. Next-best thing to a disc if you plan to go fast.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: Honda elite E swap to se50 forks??
ok ok-- so se50 87 elite fork- and newer elite brakes an metro wheel- niceWheelman-111 wrote:Greetings:
SA, SE are useless terms that confuse only. '94- later SA50 Elites got bigger 95mm drum hubs, much more Whoa-power than '93-earlier scooters. 95mm brake panel means 2.15"x10 TUBELESS Metropolitan wheel fits too. Next-best thing to a disc if you plan to go fast.
Re: Honda elite E swap to se50 forks??
already got the metro rear wheel on my engine
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Honda elite E swap to se50 forks??
Use the front springs from a 1994-2001 in the swap also.eliteE85 wrote:ok ok-- so se50 87 elite fork- and newer elite brakes an metro wheel- niceWheelman-111 wrote:Greetings:
SA, SE are useless terms that confuse only. '94- later SA50 Elites got bigger 95mm drum hubs, much more Whoa-power than '93-earlier scooters. 95mm brake panel means 2.15"x10 TUBELESS Metropolitan wheel fits too. Next-best thing to a disc if you plan to go fast.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Honda elite E swap to se50 forks??
im assuming i can run the metro rim and brake panel with the se50 1987 elite es forks?Trafficjamz wrote:Use the front springs from a 1994-2001 in the swap also.eliteE85 wrote:ok ok-- so se50 87 elite fork- and newer elite brakes an metro wheel- niceWheelman-111 wrote:Greetings:
SA, SE are useless terms that confuse only. '94- later SA50 Elites got bigger 95mm drum hubs, much more Whoa-power than '93-earlier scooters. 95mm brake panel means 2.15"x10 TUBELESS Metropolitan wheel fits too. Next-best thing to a disc if you plan to go fast.
thanks for help everyone--- just got hit with a huge blizzard and was out 24 hours plowing... now i got to find time to finish my elite