thought I had it but when I was done there was still one hose not hooked up. I have labeled all the connections can someone help me figure out what goes to where? thanks in advance for your help.
hooking up fuel and oil lines on a spree/dio swap.
Moderator: Moderator
- Dingus Khan
- Spree
- Posts: 126
- Joined: Thu Aug 22, 2013 8:42 pm
- Location: Tacoma,Washington
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: hooking up lines on a spree/dio swap.
A is gas
B is vacuum
C is oil injection out
D is oil from tank (G)
E is vacuum from (B)
F is oil from (C)
G is oil tank out to (D)
Vent goes to nothing but don't cap it off
it needs vented to atmosphere.
B is vacuum
C is oil injection out
D is oil from tank (G)
E is vacuum from (B)
F is oil from (C)
G is oil tank out to (D)
Vent goes to nothing but don't cap it off
it needs vented to atmosphere.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- Dingus Khan
- Spree
- Posts: 126
- Joined: Thu Aug 22, 2013 8:42 pm
- Location: Tacoma,Washington
Re: hooking up fuel and oil lines on a spree/dio swap.
thank you for the fast response.
Re: hooking up lines on a spree/dio swap.
I dont think F is oil from C. I think F is fuel from A.Trafficjamz wrote:A is gas
B is vacuum
C is oil injection out
D is oil from tank (G)
E is vacuum from (B)
F is oil from (C)
G is oil tank out to (D)
Vent goes to nothing but don't cap it off
it needs vented to atmosphere.
And I think "vent" is where the oil pump feeds to the carb so C goes to "vent"
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: hooking up fuel and oil lines on a spree/dio swap.
Oops I'm wrong.
Bfowler is right.
Sorry.
Bfowler is right.
Sorry.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- Dingus Khan
- Spree
- Posts: 126
- Joined: Thu Aug 22, 2013 8:42 pm
- Location: Tacoma,Washington
Re: hooking up fuel and oil lines on a spree/dio swap.
thanks bfowler, not a problem TJ.
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: hooking up fuel and oil lines on a spree/dio swap.
Let me know if you need a hand I will be around this weekend.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
- Dingus Khan
- Spree
- Posts: 126
- Joined: Thu Aug 22, 2013 8:42 pm
- Location: Tacoma,Washington
Re: hooking up fuel and oil lines on a spree/dio swap.
k sounds good. i might need some spree stuff too. plastic wise.martynkim wrote:Let me know if you need a hand I will be around this weekend.