Dio af34 questions

[Dr_Craw]

(note:img are using link due to high res and look massive in forum)
So I'm working on a dio i picked up for 500
http://i.imgur.com/Day3OEV.jpg

But local regulations require a kill switch and this one (it appears to be a live dio JDM paper work says *correction* 1990 but i cant tell)
it is an af34 (engine stamp)
http://i.imgur.com/35zlaaq.jpg

from what i can tell i need to ground one of the empty plugs on the cdi but i cant tell which one
plug(s) http://i.imgur.com/AqU16Nm.jpg
and cdi http://i.imgur.com/qHy2fc3.jpg

any help would be appreciated
thanks

[Dr_Craw]

also it feels like it is cdi restricted any advice on an unrestricted to purchase?

[bonesv]

also it feels like it is cdi restricted any advice on an unrestricted to purchase?

This is a good place to find stuff. http://japan.webike.net/ps/#!p.m=5903&p.c=1140&p.sk=1
As far as the wires go, maybe sanjuro can help you. Not many real Dio's here in the states.
Best of luck!

[Dr_Craw]

Yea I was checking webike out got some great stuff on there but I'm not 100% on my exact model or year... Getting conflicting thoughts from the parts... It has drum brakes on the front... But a zx badge. And the import papers say it's a 1990 *correction*

[bonesv]

Yea I was checking webike out got some great stuff on there but I'm not 100% on my exact model or year... Getting conflicting thoughts from the parts... It has drum brakes on the front... But a zx badge. And the import papers say it's a 2000

Check the v.i.n. to see if it matches. The number on the scooter can verify the year and exact model.

[Dr_Craw]

no luck on grounding either of those empty pins.... also ive got 2 vins one JDM and the other assigned by the gov when imported (returns Manufacturer Name: Gov of British Columbia Canada... so that one is no good) the stamped from the factory is a34-1220066
any help would be appreciated
Thanks guys

[Dr_Craw]

well that's handy if anyone else needs it

[sanjuro]

You definitely have a Live Dio AF34. It is not a ZX model.

JDM scoots do not come with kill switches as you have discovered. I will try to photograph a wiring scheme for you.

[sanjuro]

Also, the label on the inside of the seat bucket will tell you exactly which year model you have. Shoot it my way and I'll tell you what I find.

[Dr_Craw]

alrighty ill take a look and post on the seat bucket when im off work, Thanks

[LMH]

I have a Malossi CDI for the AF35 dio live if youre interested.

[LMH]

Also it definitely is not a zx. Its a cesta or SR model.

[Dr_Craw]

definitely interested in that Mallossi CDI btw pm for details?

[LMH]

I have to figure out how much I paid for it and Ill shoot you a PM. Im pretty sure of the price but I want to be sure.
Also Id like to get a picture of your plug on the other side to be sure it will properly fit. One question, do you have a stock USDM cdi from another honda elite that you can take a pic next to the CDI you have for comparison? If not can you get measurements from yours? It half way looks like a DC CDI due to the size of it. Im pretty certain that there was some years of JDM dios that used DC CDIs. If it is a DC CDI than this malossi unit wont work for you.
Malossi part number 55 8176

[LMH]

After further research the CDI I have will not work for af35 engines. Im now more certain than before you have a DC CDI.