Dio af34 questions

[Dr_Craw]

alright ill check a little deeper into the dc cdi after dinner but here are those additional pics of stickers
in the compartment (sk50ms, color rp-153p, code rp135)
http://i.imgur.com/XZ1Pl6i.jpg

on the head stock http://imgur.com/a/Ntgu0#6

and below that http://i.imgur.com/CJwfyWm.jpg

Thanks ill also grab the code off the stock cdi (also i dont have a usdm elite cdi,but i do have a couple usdm spree cdi's i could try)

[Dr_Craw]

Cdi label http://i.imgur.com/HCEZxwL.jpg
weird cdi brand http://imgur.com/a/Ntgu0#10

cdi male plug http://i.imgur.com/f79v8HJ.jpg

[Dr_Craw]

from what i can tell so far ive got a 95 live dio (sk50ms)
and the cdi i need is
http://japan.webike.net/products/519657.html

is this correct?

Thanks guys
this forum has been a great help!

[sanjuro]

Yes, you have the 1995 live dio af34 (aka no. 11 in the catalog)

yes, that's the cdi you need.

[LMH]

Hey Sanjuro while youre here, is it a DC or AC CDI? And do you know which models used DC CDIs? Makes it easier to figure out how to run an immobilizer if you know which it is.

[Dr_Craw]

and for the kill switch i may just wire in a rocker switch into the key circuit.

[sanjuro]

and for the kill switch i may just wire in a rocker switch into the key circuit.

That's what i would do.

[Dr_Craw]

By the way, has anyone on here dealt with http://www.jiangwayne.com/scooter/index.php on their site or on fbay (scooter*spark) seems a limited amount of performance parts i can find for the live dio (i don't know how well i could do on yahoo auctions and webike-which do not seem to have any jugs)
they also seem to have a shop in BC which helps with rep in my mind at least

[sanjuro]

Why aren't you just getting stuff from webike? That's an amazing source. If you need Oem Honda parts for the live Dio, I have a ton of new items from my own stock.

[Dr_Craw]

looking to get a bbk and the like, im sure ill pick up a cdi and some plastics but they only seem to have a bb piston and exhaust

[Wheelman-111]

Greetings:

I bought some muffler from JiangWayne a couple of years ago. Their prices are a bit high. Shipping was prompt but also pricey to the US. Should be cheaper to Stampede City.

[Dr_Craw]

oh my bad on webike i was only looking in the live dio section not the live dio zx
and that's good to know wheel
(also is there a way to actually check current stock on webike or just put in an order?)

[Dr_Craw]

an update
got it from webike a while ago and man did it help got from 50km/h to 60km/h just on the cdi limit

no splicing or anything
got a pipe (had the silencer rip off the end so had to fab up a cone and re-weld it back on)
semi final look

speedo from webike as well and temp gauge from graphite9 (thanks again)

pipe patch job

edit: bbk install KN planning 3port bbk

carb, intake, and oild blanking plug

The pump plug kept getting popped out from crankcase pressure so i fab'd up a plate to cover it

[Dr_Craw]

tops out at about 80km/h atm (the jetting is quite rich atm but a friend has a nice wideband o2 sensor so ill get it * spot on eventually)

[paulpauly7]

you need some final drive gears .