I purchased a Spree big bore kit on Ebay from chopchop123. The kit comes with two base gaskets, is one a spare?
Thanks
Spree Big Bore Kit
Moderator: Moderator
Re: Spree Big Bore Kit
I think you are supposed to use BOTH base gaskets.
The seller is a member here as well...he is tazland001
I am surprised there is not instructions pertaining to this issue.
Some of the other members know about this...someone will speak up, surely.
Send a pm to tazland001 in the meantime, or go back to eBay and ask him...
The seller is a member here as well...he is tazland001
I am surprised there is not instructions pertaining to this issue.
Some of the other members know about this...someone will speak up, surely.
Send a pm to tazland001 in the meantime, or go back to eBay and ask him...
RideRed
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
Re: Spree Big Bore Kit
Thanks Motormike, that was sort of what I was thinking. I should have stated that I had not received the kit yet and was looking at the picture on ebay. I'm sure there will be some instructions included.
Thanks Again
Thanks Again
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Spree Big Bore Kit
The second gasket is to shim the cylinder to get the piston not to contact the head you may or may not need it. There should be an instruction sheet in the box. Follow those instructions to the letter for break in and for installation and you will have a happy bbkit
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: Spree Big Bore Kit
after just reading the Polini instructions. I can only imagine what the tiawan instructions look like
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
Re: Spree Big Bore Kit
graphite9 wrote:I sell these kits, and I never use the second gasket. I'm personally running one on my bike, runs awesome. Also, there are never directions with the tiawan bores. The polini ones are hard enough to understand. I can see the tiawan directions now
1: add faucet connection to locomotive hole
2 slide pipe over happy shaft
3 enjoy off road excite.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Spree Big Bore Kit
taz includes his own instructions with his kits, or he used to anyway.
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock