I have an af18e Dio.
Just a question as to where should the belt be riding on the variator at rest. Should it be riding on the boss or partly up the sheave?
With my stock variator, it rides about 1/3 the way up the sheave at rest(IE: engine not running)
Variator and belt
Moderator: Moderator
Re: Variator and belt
If it doesn't, does that mean that my boss is too short? Belt measures about 15mm wide.graphite9 wrote:Belt should be settled all the way down against the boss.
Re: Variator and belt
I don't have it totally assembled yet (aft clutch not on), but I placed the belt in and it doesn't ride right on the boss. This is for both my stock variator and the Polini. If I use the Polini boss for either vari, it definitely rides on the boss.
I'm wondering why this is?
I'm thinking that when in the stock config, it should ride on the boss, but it doesn't; so why did Honda design it this way??
I'm wondering why this is?
I'm thinking that when in the stock config, it should ride on the boss, but it doesn't; so why did Honda design it this way??
Re: Variator and belt
So I just went out and measured it(how far off of the boss)and it measured 0.080(1/16ish). I'm probably guessing not a big deal.
Thoughts?
Thoughts?
Re: Variator and belt
Thanks! Just wanted to make sure!graphite9 wrote:Oh that's perfect. Your golden.