MLM pipe on a stock Honda Spree

Loops · Post by **Loops** » Sun Jan 25, 2015 8:37 pm

I have a Spree that I want to install a MLM pipe that I have. I believe the stock pipe is clogged so now would be a good time. My question is what jets should I run to get the most out of it?

Johnniespeed · Post by **Johnniespeed** » Sun Jan 25, 2015 8:56 pm

I don't know the answer, but Motion Left Mopeds ( MLM ) has an email address and phone number on their website. I would imagine they would have some knowledgeable insight to your inquiry.

Loops · Post by **Loops** » Sun Jan 25, 2015 9:03 pm

Cool thank you

paulpauly7 · Post by **paulpauly7** » Mon Jan 26, 2015 12:05 am

if everything else is left stock then maybe just 2 sizes up .Get a few jets to play with start at 90 that should be rich and work your way down and do plenty of plug chops as id bet you dont have a temp guage .

swimmingfree · Post by **swimmingfree** » Mon Jan 26, 2015 7:55 am

or you cood build a fire and throw the old pipe in and clean it ... just dont cool it with water it will worp the pipe ...
swimmingfree

Loops · Post by **Loops** » Mon Jan 26, 2015 9:31 am

Thanks I will start a 90 and work down

patthesoundguy · Post by **patthesoundguy** » Wed Jan 28, 2015 11:04 pm

Stock motor on the spree run the airbox as it's intended and run the pipe with the stock jet. I did the initial testing for that pipe. I have the first one he made. It works great on the stock jet. And it will run no better if you pull the air box and upjet. A 90 jet on the stock motor will be so rich it will suck monkey butt.

Honda Spree and Elite 50 Forums

MLM pipe on a stock Honda Spree

MLM pipe on a stock Honda Spree

Re: MLM pipe on a stock Honda Spree

Re: MLM pipe on a stock Honda Spree

Re: MLM pipe on a stock Honda Spree

Re: MLM pipe on a stock Honda Spree

Re: MLM pipe on a stock Honda Spree

Re: MLM pipe on a stock Honda Spree