Kick Start not engaging

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

User avatar
OneBulletDan
Elite
Elite
Posts: 343
Joined: Wed Sep 28, 2011 12:40 pm
Location: The Great State of Michigan

Re: Kick Start not engaging

Post by OneBulletDan »

It only took me two minutes and six bolts to prove myself wrong.
001.JPG
001.JPG (121.1 KiB) Viewed 1750 times
I`ll shut up now. :oops:
We can learn much from wise words, and less from wise guys.
smalloy32
Noob
Noob
Posts: 2
Joined: Tue Jun 16, 2015 2:06 pm
Location: Madison

Re: Kick Start not engaging

Post by smalloy32 »

My problem with the kickstart is that I can get it to start right away but once I turn it off and try to re-start it jams everytime. The only way to un-jam it is to take off the plate and reset, which is really annoying. I do not think this is a flooding problem, but a consistent jamming issue, even though I used a ton of lithium lube on the gears.
User avatar
Wheelman-111
Moderator
Moderator
Posts: 11325
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: Kick Start not engaging

Post by Wheelman-111 »

Greetings:

This happens when the snap ring that holds the kicker shafts fails and the shafts slides inwards. Check that the spring is hooked to the correct points. Finally, flat out wear on the shafts and the bushings the can cause off-axis jams. New parts are necessary.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Post Reply