Will performing the test stated above, tomorrow.wwolvert wrote:Your meter should complete the circuit you have a blown fuse in your meter try the voltage drop test shown in your manual like you where doing first and unplug your regulator if your voltage goes away with your key off your regulator is shorted out and needs replaced . that's my best guess any ways
Really appreciate the help.
The last thing I did tonight was to trace the entire wire harness.
2. Pulled ALL the factory wrapped tape looking for abrasions or chafing.
3. Unplugged every connector. Checked the connectors and terminals for corrosion or broken connections.
4. Unbolted the frame ground and wire brushed the bolt/threads before refastening.