Hi guys, new to the forum, from Australia our nifty 50 would be like your spree over there, anyway when you stop her with the brakes or slow right down it stalls.. any ideas ??? also how to tune it in, if that's the problem... found a wild idle screw on side which makes the wheel spin faster and I also thought there maybe a mixture screw as well but l don't know where that is, the is a little one you can screw near the idle on... any help would be great
thanks again
david
nifty 50 (spree) stalls when stop and brake
Moderator: Moderator
- vintagegarage
- Elite
- Posts: 817
- Joined: Tue Jun 23, 2015 7:03 pm
- Location: Florida
Re: nifty 50 (spree) stalls when stop and brake
Download the factory workshop manual from this site below for free, and it will show you the location of the idle mixture screw on the carb.. it will also tell you how to properly set the idle speed and many other things you will need to know:
http://www.motorscooterguide.net/Downlo ... loads.html
The Spree workshop manual itself is at:
http://www.motorscooterguide.net/Manual ... Manual.pdf if that is all you want from the list
http://www.motorscooterguide.net/Downlo ... loads.html
The Spree workshop manual itself is at:
http://www.motorscooterguide.net/Manual ... Manual.pdf if that is all you want from the list
Re: nifty 50 (spree) stalls when stop and brake
This sounds really dumb but try grounding the engine to the frame directly. In the past ive had issues with the engine stalling at a dead stop. Also you cant be too grounded.
Re: nifty 50 (spree) stalls when stop and brake
Thanks, will try, let you know when I get to it.
Dave
Dave