strange noise ?
Moderator: Moderator
strange noise ?
Hi new to site, and it great ! My question is......
I have a 1985 honda spree that runs good, about 3400 miles, and still hits 3o mph with little problem. I bought it used so I have no idea what if any work has been done to motor. The problem I have is after the bike warms up I get a whislte\whine sound from the fan area. I tried to look in without removing the cover and it looks like the fan is not hitting anything.
has anyone heard of this ? and what could be wrong ? I am hoping it is not the crank bearings, but I am leaning that way. What do you think ?
Thanks in advance
Bill
I have a 1985 honda spree that runs good, about 3400 miles, and still hits 3o mph with little problem. I bought it used so I have no idea what if any work has been done to motor. The problem I have is after the bike warms up I get a whislte\whine sound from the fan area. I tried to look in without removing the cover and it looks like the fan is not hitting anything.
has anyone heard of this ? and what could be wrong ? I am hoping it is not the crank bearings, but I am leaning that way. What do you think ?
Thanks in advance
Bill
HHASAHHAAHAH YOU ARE THE FIRST PERSON THAT HAS HAD THAT PROBLEM OTHER THEM ME!!!! I DRIVE MYSELF CRAZY TRYING TO FIND WHAT IT WAS, IT WAS LOUD AND ANNOYING. I FINELY TOOK APART EH CASE AND CRANK BEARINGS WERE SHOT. IF YOU WANT HELP DOING IT I CAN GIVE YOU A STEP BYE STEP TO DO IT, OR I REBUILD ENGINES AND WILL CHANGE EVERYTHING BEARINGS, SEALS, EVERYTHING. LOOK AT MY PRICES AT freewebs.com/mopedparts
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
well first, check your crank for play! that will tell you if its the bearings or not. just take off the pulley on the transmission side and grab the crank and see if you can freely at all move it up/down side to side. If you can move 1mm or more in any direction then its the bearings.
and if its running well those bearings may still last a while before finally giving out, as long as the case itself isnt leaking through them.
just things to check and think about.
and if its running well those bearings may still last a while before finally giving out, as long as the case itself isnt leaking through them.
just things to check and think about.
projects galore
Once the bearings are out you should be able to source them at any bearing shop.
Admin, Hondaspree.net
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Well I got the thing apart, and took the crank to a honda dealer to get them to pull the bearings off..... and the guy who works on bikes said all the bearings in the crank look great, no need to replace them unless I have $ to blow...... So I went home to inspect the spree better and found that the oil pump hold down bolt was loose, causing the gear to rub the case.... sound like this could be my problem ? anyone heard of this one ?