Trying to get your Spree/Elite to run, or run better? Post your questions here.
Moderator: Moderator
illuminance
Noob
Posts: 17 Joined: Fri Mar 30, 2007 1:57 pm
Location: Northern California, USA
Post
by illuminance » Wed May 30, 2007 9:55 pm
The manual says the transmission has a .09 liter/.095 quart capacity. Where do I put this in, or change or drain it? I should know this, but can't find any drain plug or a place to add it. Thanks for helping the stupids like me.
Dac
Veteran OG
Posts: 3342 Joined: Sat May 05, 2007 5:58 pm
Location: SouthWest Michigan
Contact:
Post
by Dac » Wed May 30, 2007 10:11 pm
yeah ill also need to know this for a 92 elite..
come on smart people help us
"Its not what you ride, its that you ride"
1996--------Honda Elite S-
1991--------Tomos Targa-
And a Bunch of other bikes.
Kenny_McCormic
CBR1000RR
Posts: 4957 Joined: Sun Apr 16, 2006 11:51 am
Location: Southern Michigan
Post
by Kenny_McCormic » Wed May 30, 2007 10:11 pm
its the big bolt on the side of the engine set the bike on its side to drain the with it upright fill it till oil comes out of the hole
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
Farfignugin
Veteran OG
Posts: 489 Joined: Mon Jul 23, 1973 10:24 am
Location: Unadilla, NY
Post
by Farfignugin » Thu May 31, 2007 8:16 am
yea it's right by the wheel on the left side looking from the back.
illuminance
Noob
Posts: 17 Joined: Fri Mar 30, 2007 1:57 pm
Location: Northern California, USA
Post
by illuminance » Fri Jun 01, 2007 12:52 am
Thank you very much, it was right where you said it was!
HuskieMobileMan
Spree
Posts: 167 Joined: Sun Feb 25, 2007 11:18 am
Post
by HuskieMobileMan » Fri Jun 01, 2007 10:12 am
Some have a drain plug too. My NH80 has it and it is a lot easier than tipping it sideways.
'87 Elite SE50 w/65cc Polini Kit
'84 Aero NH125
'84 Aero NH80
'05 Kymco ZX50
Farfignugin
Veteran OG
Posts: 489 Joined: Mon Jul 23, 1973 10:24 am
Location: Unadilla, NY
Post
by Farfignugin » Fri Jun 01, 2007 10:14 am
yea just remember to take out the battery before you tip it if it isn't a sealed battery... don't want acid leaking everywhere...
ricky1022
Noob
Posts: 16 Joined: Thu May 31, 2007 10:19 pm
Location: providence
Post
by ricky1022 » Tue Jun 05, 2007 2:40 am
acid? mine has little covers over each of the hles to make sure no acid goes everywhere, i think u might need those
Farfignugin
Veteran OG
Posts: 489 Joined: Mon Jul 23, 1973 10:24 am
Location: Unadilla, NY
Post
by Farfignugin » Tue Jun 05, 2007 8:12 am
It will still leak out from the breather tube, unsealed batteries have a tendency to leak no matter what if they are turned on their sides or upside-down.