Way too Fast!

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
hondaspree84
Noob
Noob
Posts: 9
Joined: Sat Jul 31, 2004 8:00 pm

Way too Fast!

Post by hondaspree84 »

I just got the Spree running with a entire can of carb cleaner! (thanks Jerry).

Ok.. the only thing is that the back tire is racing out of control... I tried to adjust the speed screw-- but it just kept running fast...

Any Help Here?>
Top
User avatar
hondaman
Elite
Elite
Posts: 529
Joined: Mon Jul 23, 1973 10:24 am

way too fast

Post by hondaman »

Sounds like you are either adjusting the wrong screw or your throttle valve is either stuck or not in correctly.
Top
User avatar
vette76
CB900F
CB900F
Posts: 1853
Joined: Sat Jul 31, 2004 8:00 pm
Location: rhode island

Post by vette76 »

right, the throttle valve fits in the wrong way also and holds it at wide open.pull it out and turn it 180 degrees.(when u put it back in make sure it covers the hole,looking through the air intake side)
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
Top
User avatar
hondaspree84
Noob
Noob
Posts: 9
Joined: Sat Jul 31, 2004 8:00 pm

Post by hondaspree84 »

Thanks guys -- I realize now that when you put the throttle valve in -- it shouldn't be hard to do... The line in the back of the valve was a good guide once i shine a flashlight on it...

Worked perfectly.!
Top
Post Reply

Return to “Technical Help”