![wink :wink:](./images/smilies/icon_e_wink.gif)
At this point I have assembled everything after cleaning it, along with putting on new seals, grease and spark plug. However now I cannot get the engine to pull a vacuum on the line. If I suck on the vacuum line fuel comes out easily, but when I hook it up to the carb, fuel does not flow.
I have tried other means of temporarily starting the engine such as carb cleaner and priming the carb or cylinder with fuel to no avail. Before it broke down my spree could get up to 35 or a little above on flat road according to the speedometer, so I have assumed so far the problem isn't compression.
So any ideas at all on what I should do next, because at this point I really don't want to take this in to get it fixed. I personally cannot accept defeat this easily.