bradthree wrote:I already sourced that 8" front JDM wheel from wheelman back in the day off his DJ-1 partout but am really wanting to find a way to put those 4 lug wheels on there. I'm going off a hunch with those adapters as if you can tell by the pic they are a 6 lug. I know Honda has many parts that interchange and it just turns out that the later Gyros run a 6 lug? I'll bet that Honda-San's 3 bolts of the road fox will fit within the 6 holes of the gyro X.
Could be - you are correct on the lug, unless the artist meant it when he left the 6th hole off . The outer rim & hubcap look much like our TG50's in the diagram below. This is a Gyro Canopy.
Gyro_Canopy_RearHub.JPG (26.31 KiB) Viewed 3512 times
Or maybe just use that $100 towards chroming the wheels like that guy in the pic...
BTW any more pics of that Road Fox? I really like the front fender too
Wish I had more pics and an email address for that yellow Road Fox. I think the front fender is stock JDM.
RoadFox_FrontLeft.JPG (55.73 KiB) Viewed 3511 times
bradthree, I picked up a 85 Gyro and a parts gyro a few weeks ago.
Are you aware of any mods available for this?
I have a few extra new rear tires as well.
Mousewheels is more the Gyro sensei. Thre are a few homebrew mods to help gain speed and acceleration. If the gyro shares similarities with its japanese counterpart gyroX then there may be bolt ons available.
I was at Wal-Mart and saw these tires . and actually bought a set just to see if they would fit .I didnt mount them but it looked really close one problem .. they would rub on the plastic side covers . So I returned them ..
The size was 15x6.0-6/2 and cost $20.00ea. but have gone up in price a few bucks .
And another set 13x5.0-6/2 cost $10.00 ea.
I dont know tires but do you think they would be too wide on the rim ?
Also they are made for mini tractors and wheelbarrels but they do actually look really good .
OK here is an update ..I just got another Gyro w/ * tires wrong size too small looked like crap .
So I looked and looked and ended up back at Wal-Mart the local motorycycle shop wanted $39.00 Wall mart $22.00
I also got some tubes at Harbor Freight like $4.00 bucks .Done
Stuck one on just to see what it would look like .... judge for yourself ... By the way they will rub on the plastic .
How will I solve that problem ....EASY ! ....make some new fenders .
I have not driven on them yet ...so I can't tell you what they will ride like . But the bigger size should make the bike a little faster as the smaller tires gave it more pick up but lost some top end .
100_0836.jpg (135.29 KiB) Viewed 3389 times
This bike is missing so many parts I think it will be the IRONMAN BIKE .
100_0808.jpg (189.53 KiB) Viewed 3389 times
I just stuck them on to see how goofy they will look ..... Really goofy ....