how do i remove spree gears>?

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
jamadi112233
Spree
Spree
Posts: 115
Joined: Fri Sep 04, 2009 6:42 pm
Location: springfield illinois

how do i remove spree gears>?

Post by jamadi112233 »

Im trying to take out my stock gears in my spree. I have the gear cover removed, but i cannot figure out how to remove the shaft that the clutch bolts onto.
User avatar
odinxxix
CB900F
CB900F
Posts: 1640
Joined: Mon Jun 15, 2009 1:09 pm
Location: lafayette,Indiana

Re: how do i remove spree gears>?

Post by odinxxix »

1. drain oil from rear
2. remove belt cover and use strap wrench or some form of wrench to hold clutch bell houseing(dont bend),and remove tire
3. remove clutch and pulley
4.remove rear cover
5 gears will slide out with no problem(careful seals dont damage them)
6 assembly in reverse.
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
jamadi112233
Spree
Spree
Posts: 115
Joined: Fri Sep 04, 2009 6:42 pm
Location: springfield illinois

Re: how do i remove spree gears>?

Post by jamadi112233 »

Your right! i was being gentle on the one that the clutch attaches to. A little force, and out it came. Thank you. Hopefully my gears will be here tomorrow.
User avatar
odinxxix
CB900F
CB900F
Posts: 1640
Joined: Mon Jun 15, 2009 1:09 pm
Location: lafayette,Indiana

Re: how do i remove spree gears>?

Post by odinxxix »

glad i could help!! are you getting the taz gears?
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
jamadi112233
Spree
Spree
Posts: 115
Joined: Fri Sep 04, 2009 6:42 pm
Location: springfield illinois

Re: how do i remove spree gears>?

Post by jamadi112233 »

should be here tomorrow or Tuesday!!! * PUMPED!!!!!
Post Reply