Honda Spree and Elite 50 Forums

How hard is it to replace clutch pads? Where would i go to get the pads? And what about springs?

it's fairly easy, i can get clutch pads and springs for you!

All you have to do is tap out the rod that holds the pads to the clutch, and then disconnect the springs, and they're off.

cool. Any performance pads or anything like that? And what about springs? different choices?

yeah, i can get performance pads, and you can get i believe i can get Stock OEM replacements, or 1000,1500, or 2000 RPM springs! PM if you're interested

They can be relined as well. Since you are local call up Southside brake & clutch in Tacoma and ask them.

Het marty have you worked with them before?

Sure I have bit not scooter related. Pretty good guys down there they can fix it as good as new.

Alright cool, ill have to give them a call. Hey marty do you have a sb50 shock?

If it's the same as the 94-01 elite, i do.

I have several shocks. Not an SB tell me the length. I see what I have. I have so many you can have it.

i need an 88-89 elite E shock. One sec marty let me look.

10 7/8" is elite E spree is 10 1/8"

My 94-01 shock is 10 7/8 if martynkim don't have one.

what is the outside width of the part that mounts to the case?

This is the full length? PM me a number